[Device]: Peplink EPX Extreme Performance SD-WAN Router (EPX-M8) #495

Closed
opened 2026-11-08 06:16:39 +00:00 by jaylouisw · 3 comments
Owner

Vendor

Peplink

Exact model name

EPX-M8

Category

Router

Ports and interfaces

  • See product page for full port list

Ports inferred from the 4gon product name; confirm against the product page.

PoE budget (watts)

None

Datasheet or product page URL

https://www.4gon.co.uk/peplink-epx-extreme-performance-sdwan-router-epxm8-p-9182.html

What do you want to model with it?

A router/gateway node in a routed lab (NAT, DHCP, VPN, cellular WAN).

Capabilities

routing, NAT, DHCP, l3-forward

Before submitting

  • I searched the catalog and existing issues, and this model is not there yet.
  • The port list above comes from a datasheet, not from memory or another wiki.
### Vendor Peplink ### Exact model name EPX-M8 ### Category Router ### Ports and interfaces - See product page for full port list > Ports inferred from the 4gon product name; confirm against the product page. ### PoE budget (watts) None ### Datasheet or product page URL https://www.4gon.co.uk/peplink-epx-extreme-performance-sdwan-router-epxm8-p-9182.html ### What do you want to model with it? A router/gateway node in a routed lab (NAT, DHCP, VPN, cellular WAN). ### Capabilities routing, NAT, DHCP, l3-forward ### Before submitting - [x] I searched the catalog and existing issues, and this model is not there yet. - [x] The port list above comes from a datasheet, not from memory or another wiki.
jaylouisw referenced this issue from a commit 2026-11-08 06:43:28 +00:00
Author
Owner

Closing status: blocked on a stated configuration, and the datasheet says why in its own words.

The EPX spec table gives ranges rather than a census:

WAN Interface: 4-28x 10G SFP+ Ports · LAN Interface: 8-56x GE Ports · PoE Output: 8x 802.3at PoE+ Output · Power: 300W System and module, 330W PoE+ Power Budget

and the ordering row reads "EPX Base Model, 1x OLED Module" - i.e. seven expansion slots and no fixed ports at all. The only numbers that are not ranges (8x PoE+, 330 W budget) depend on the PoE module being fitted.

Note #495 (EPX-M8) and #494 (EPX-M8-LW5C1F1) are the same chassis with a licence bundle on top, so they close together once a configuration is named.

What would close it: a module set ("EPX with two EXM-8C and one EXM-4F"), which then gives an exact port census from the module datasheets. The SDX closed (#458) precisely because its ordering row did publish a base-chassis port list; the EPX's does not.

Closing status: **blocked on a stated configuration, and the datasheet says why in its own words.** The EPX spec table gives ranges rather than a census: > WAN Interface: **4-28x 10G SFP+ Ports** · LAN Interface: **8-56x GE Ports** · PoE Output: 8x 802.3at PoE+ Output · Power: 300W System and module, 330W PoE+ Power Budget and the ordering row reads "**EPX Base Model, 1x OLED Module**" - i.e. seven expansion slots and no fixed ports at all. The only numbers that are not ranges (8x PoE+, 330 W budget) depend on the PoE module being fitted. Note #495 (EPX-M8) and #494 (EPX-M8-LW5C1F1) are the **same chassis** with a licence bundle on top, so they close together once a configuration is named. **What would close it:** a module set ("EPX with two EXM-8C and one EXM-4F"), which then gives an exact port census from the module datasheets. The SDX closed (#458) precisely because its ordering row did publish a base-chassis port list; the EPX's does not.
Author
Owner

The platform is now in the catalogue; the bare chassis has no ports to cable. PR #1736 adds EPX-M8-LW5C1F1 and EPX-M8-LW2C1F1 from Peplink's own ordering table, so what this issue asks for exists for every orderable build except the two that cannot be stated safely.

Three things from the vendor's own material settle the shape of it:

  1. EPX-M8 alone is a chassis with no interfaces. The ordering row is EPX-M8 EPX Base Model, 1x LCD Module, and the datasheet's "Base Chassis" page lists throughput (30 Gbps), power (215 W / 200 W chassis + 15 W LCD), dimensions and certificates — and no port rows at all, because every data port arrives on a FlexModule (Module Expansion: Yes (7 slots for FlexModule Plus)). A spec with zero ports is refused by loadCatalog() ("nothing to cable to"), so there is deliberately no EPX-M8 file: the honest record of that box is the three orderable configurations.
  2. Two of them are in now: EPX-M8-LW5C1F1 = 4x 10G SFP+, 8x GE and 15x LTE-A (1x EXM-4F + 1x EXM-8C + 5x EXM-3LTEA = 7 slots) and EPX-M8-LW2C1F1 = 4x 10G SFP+, 8x GE and 6x LTE-A (4 slots).
  3. The third, EPX-M8-LW1C3F3 (12x 10G SFP+, 24x GE, 3x LTE-A), is blocked on a contradiction inside the datasheet, not on research effort: its three EXM-8C modules give 24 PoE-capable GE ports, while the EPX-M8 spec table says PoE Output 8x 802.3at PoE+ Output (rev 2404-v15) and the EXM-8C footnote says ^ The EPX-8M can support a maximum of 2 modules delivering PoE (rev EPX-201910-v7) — 24, 8 and 16 for the same build. A stated configuration would unblock it: which of the 24 GE ports are expected to source power, or a Peplink statement that the 8x row is the per-module figure.

URLs checked for this comment: https://download.peplink.com/resources/peplink_epx_datasheet.pdf (rev 2404-v15) · https://www.peplink.com/compare/tech-specs/epx.pdf · https://web.archive.org/web/20200421214219/https://download.peplink.com/resources/peplink_epx_datasheet.pdf (ordering table + base-chassis page) · https://www.advantesco.com/assets/files/peplink_epx_datasheet.pdf (rev EPX-201910-v7).

If the intent behind this issue was a specific build (say LW5C1F1), it is covered by #1736 and this can be closed against it; if it was the 24-GE wired build, the PoE split above is the one thing I will not guess.

**The platform is now in the catalogue; the bare chassis has no ports to cable.** PR #1736 adds `EPX-M8-LW5C1F1` and `EPX-M8-LW2C1F1` from Peplink's own ordering table, so what this issue asks for exists for every orderable build except the two that cannot be stated safely. Three things from the vendor's own material settle the shape of it: 1. **`EPX-M8` alone is a chassis with no interfaces.** The ordering row is `EPX-M8 EPX Base Model, 1x LCD Module`, and the datasheet's "Base Chassis" page lists throughput (30 Gbps), power (215 W / 200 W chassis + 15 W LCD), dimensions and certificates — and no port rows at all, because every data port arrives on a FlexModule (`Module Expansion: Yes (7 slots for FlexModule Plus)`). A spec with zero ports is refused by `loadCatalog()` ("nothing to cable to"), so there is deliberately no `EPX-M8` file: the honest record of that box is the three orderable configurations. 2. **Two of them are in now**: `EPX-M8-LW5C1F1` = `4x 10G SFP+, 8x GE and 15x LTE-A` (1x EXM-4F + 1x EXM-8C + 5x EXM-3LTEA = 7 slots) and `EPX-M8-LW2C1F1` = `4x 10G SFP+, 8x GE and 6x LTE-A` (4 slots). 3. **The third, `EPX-M8-LW1C3F3` (12x 10G SFP+, 24x GE, 3x LTE-A), is blocked on a contradiction inside the datasheet**, not on research effort: its three EXM-8C modules give 24 PoE-capable GE ports, while the EPX-M8 spec table says `PoE Output 8x 802.3at PoE+ Output` (rev 2404-v15) and the EXM-8C footnote says `^ The EPX-8M can support a maximum of 2 modules delivering PoE` (rev EPX-201910-v7) — 24, 8 and 16 for the same build. A stated configuration would unblock it: which of the 24 GE ports are expected to source power, or a Peplink statement that the 8x row is the per-module figure. URLs checked for this comment: `https://download.peplink.com/resources/peplink_epx_datasheet.pdf` (rev 2404-v15) · `https://www.peplink.com/compare/tech-specs/epx.pdf` · `https://web.archive.org/web/20200421214219/https://download.peplink.com/resources/peplink_epx_datasheet.pdf` (ordering table + base-chassis page) · `https://www.advantesco.com/assets/files/peplink_epx_datasheet.pdf` (rev EPX-201910-v7). If the intent behind this issue was a specific build (say LW5C1F1), it is covered by #1736 and this can be closed against it; if it was the 24-GE wired build, the PoE split above is the one thing I will not guess.
Author
Owner

Unblocked, and it was not a contradiction that needed a judgement call — two current Peplink documents resolve it.

  • The EPX datasheet's LAN row (8-56x GE Ports with PoE+ Output, rev 2404-v15) can only reach 56 at 8 GE ports per module across the 7 FlexModule Plus slots, so the flat PoE Output 8x 802.3at PoE+ Output line on the same table is the one-module base figure, not a chassis ceiling.
  • The FlexModule datasheet (ref 2507-v26) says it positively: EXM-8C is 15 W (Max. 240W, 30W / PoE+ port, total 8 PoE+ ports).
  • The 2019 maximum of 2 modules delivering PoE footnote is in neither current document; 2507-v26 replaces it with not compatible with ... FlexModule Slot 2 of EPX, i.e. six PoE-capable slots, which a three-module build does not reach.

So EPX-M8-LW1C3F3 = 12x 10G SFP+, 24x 1G RJ45 all PoE+, 3x LTE-A, 330 W chassis budget. PR #1771 adds devices/peplink/epx-m8-lw1c3f3.json and starts with Fixes #495, so merging closes this.

The one thing still inconsistent inside Peplink's own files — 7 slots x 8 = 56 PoE+ in the range row vs six modules per the slot-2 note — is recorded in the spec's notes rather than guessed; it is an extreme-case limit that does not reach this build.

**Unblocked, and it was not a contradiction that needed a judgement call — two current Peplink documents resolve it.** - The EPX datasheet's LAN row (`8-56x GE Ports with PoE+ Output`, rev 2404-v15) can only reach 56 at 8 GE ports per module across the 7 FlexModule Plus slots, so the flat `PoE Output 8x 802.3at PoE+ Output` line on the same table is the **one-module base figure**, not a chassis ceiling. - The FlexModule datasheet (ref 2507-v26) says it positively: EXM-8C is `15 W (Max. 240W, 30W / PoE+ port, total 8 PoE+ ports)`. - The 2019 `maximum of 2 modules delivering PoE` footnote is in neither current document; 2507-v26 replaces it with `not compatible with ... FlexModule Slot 2 of EPX`, i.e. six PoE-capable slots, which a three-module build does not reach. So `EPX-M8-LW1C3F3` = 12x 10G SFP+, 24x 1G RJ45 all PoE+, 3x LTE-A, 330 W chassis budget. PR #1771 adds `devices/peplink/epx-m8-lw1c3f3.json` and starts with `Fixes #495`, so merging closes this. The one thing still inconsistent inside Peplink's own files — 7 slots x 8 = 56 PoE+ in the range row vs six modules per the slot-2 note — is recorded in the spec's notes rather than guessed; it is an extreme-case limit that does not reach this build.
Sign in to join this conversation.
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge#495
No description provided.