[Device]: Peplink EPX Extreme Performance SD-WAN Router EPX-M8-LW5C1F1 #494

Closed
opened 2026-11-08 06:16:38 +00:00 by jaylouisw · 1 comment
Owner

Vendor

Peplink

Exact model name

Peplink EPX Extreme Performance SD-WAN Router EPX-M8-LW5C1F1

Category

Router

Ports and interfaces

  • See product page for full port list

Ports inferred from the 4gon product name; confirm against the product page.

PoE budget (watts)

None

Datasheet or product page URL

https://www.4gon.co.uk/peplink-epx-extreme-performance-sdwan-router-epxm8lw5c1f1-p-9183.html

What do you want to model with it?

A router/gateway node in a routed lab (NAT, DHCP, VPN, cellular WAN).

Capabilities

routing, NAT, DHCP, l3-forward

Before submitting

  • I searched the catalog and existing issues, and this model is not there yet.
  • The port list above comes from a datasheet, not from memory or another wiki.
### Vendor Peplink ### Exact model name Peplink EPX Extreme Performance SD-WAN Router EPX-M8-LW5C1F1 ### Category Router ### Ports and interfaces - See product page for full port list > Ports inferred from the 4gon product name; confirm against the product page. ### PoE budget (watts) None ### Datasheet or product page URL https://www.4gon.co.uk/peplink-epx-extreme-performance-sdwan-router-epxm8lw5c1f1-p-9183.html ### What do you want to model with it? A router/gateway node in a routed lab (NAT, DHCP, VPN, cellular WAN). ### Capabilities routing, NAT, DHCP, l3-forward ### Before submitting - [x] I searched the catalog and existing issues, and this model is not there yet. - [x] The port list above comes from a datasheet, not from memory or another wiki.
Author
Owner

Closing status: blocked on a stated configuration, and the datasheet says why in its own words.

The EPX spec table gives ranges rather than a census:

WAN Interface: 4-28x 10G SFP+ Ports · LAN Interface: 8-56x GE Ports · PoE Output: 8x 802.3at PoE+ Output · Power: 300W System and module, 330W PoE+ Power Budget

and the ordering row reads "EPX Base Model, 1x OLED Module" - i.e. seven expansion slots and no fixed ports at all. The only numbers that are not ranges (8x PoE+, 330 W budget) depend on the PoE module being fitted.

Note #495 (EPX-M8) and #494 (EPX-M8-LW5C1F1) are the same chassis with a licence bundle on top, so they close together once a configuration is named.

What would close it: a module set ("EPX with two EXM-8C and one EXM-4F"), which then gives an exact port census from the module datasheets. The SDX closed (#458) precisely because its ordering row did publish a base-chassis port list; the EPX's does not.

Closing status: **blocked on a stated configuration, and the datasheet says why in its own words.** The EPX spec table gives ranges rather than a census: > WAN Interface: **4-28x 10G SFP+ Ports** · LAN Interface: **8-56x GE Ports** · PoE Output: 8x 802.3at PoE+ Output · Power: 300W System and module, 330W PoE+ Power Budget and the ordering row reads "**EPX Base Model, 1x OLED Module**" - i.e. seven expansion slots and no fixed ports at all. The only numbers that are not ranges (8x PoE+, 330 W budget) depend on the PoE module being fitted. Note #495 (EPX-M8) and #494 (EPX-M8-LW5C1F1) are the **same chassis** with a licence bundle on top, so they close together once a configuration is named. **What would close it:** a module set ("EPX with two EXM-8C and one EXM-4F"), which then gives an exact port census from the module datasheets. The SDX closed (#458) precisely because its ordering row did publish a base-chassis port list; the EPX's does not.
Sign in to join this conversation.
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge#494
No description provided.