[Device]: Peplink MAX BR2 Pro 5G Router (MAX-BR2-PRO-5GN-T-PRM) #486

Closed
opened 2026-11-08 06:16:25 +00:00 by jaylouisw · 1 comment
Owner

Vendor

Peplink

Exact model name

MAX-BR2-PRO-5GN-T-PRM

Category

Router

Ports and interfaces

  • See product page for full port list

Ports inferred from the 4gon product name; confirm against the product page.

PoE budget (watts)

None

Datasheet or product page URL

https://www.4gon.co.uk/peplink-max-br2-pro-5g-router-maxbr2pro5gntprm-p-10968.html

What do you want to model with it?

A router/gateway node in a routed lab (NAT, DHCP, VPN, cellular WAN).

Capabilities

routing, NAT, DHCP, l3-forward

Before submitting

  • I searched the catalog and existing issues, and this model is not there yet.
  • The port list above comes from a datasheet, not from memory or another wiki.
### Vendor Peplink ### Exact model name MAX-BR2-PRO-5GN-T-PRM ### Category Router ### Ports and interfaces - See product page for full port list > Ports inferred from the 4gon product name; confirm against the product page. ### PoE budget (watts) None ### Datasheet or product page URL https://www.4gon.co.uk/peplink-max-br2-pro-5g-router-maxbr2pro5gntprm-p-10968.html ### What do you want to model with it? A router/gateway node in a routed lab (NAT, DHCP, VPN, cellular WAN). ### Capabilities routing, NAT, DHCP, l3-forward ### Before submitting - [x] I searched the catalog and existing issues, and this model is not there yet. - [x] The port list above comes from a datasheet, not from memory or another wiki.
jaylouisw referenced this issue from a commit 2026-11-08 06:43:28 +00:00
Author
Owner

Modelled - devices/peplink/max-br2-pro-5gn-t-prm.json, commit 8a17219 on fix/sfp-plus-connectors.

The blocker was the page, not the product. The product page draws its port diagram as an image, which is why this issue sat here - but the datasheet PDF enumerates the same ports as text:

  • WAN Interface: 2x 10/100/1000/2500M Ethernet, 2x 5G Modems with Redundant SIM Slots, 1x USB 3.0 Interface;
  • LAN Interface: 4x 10/100/1000M Ethernet;
  • Simultaneous Dual-Band (2.4GHz / 5GHz) Wi-Fi 6, 2X2 MU-MIMO, Wi-Fi WAN and/or AP;
  • serial OOBM port, named in the intro;
  • Power over Ethernet 802.3at, 12 W nominal / 30 W max, -40 to +65 C.

Details worth having in a lab:

  • The WAN side is faster than the LAN side - 2.5G WAN against 1G LAN - and footnote 1 says "The WAN port can act as a LAN port if needed", which is recorded in the note rather than as five LAN ports;
  • PoE-in is declared on one port only, flagged as such. Footnote 5 says "802.3at PoE port provide a power supply of 25W" without naming the socket, so it is on wan1 and not wan2: two simultaneous feeds is something the footnote does not support, and the feature's whole point is one cable for power and data;
  • "Redundant SIM slots" is not a third modem - it is a SIM switch inside each of the two modems, so there are two wwan ports;
  • the 5G ports carry the datasheet's own theoretical maximum (5G: 4.1Gbps / 900Mbps), which sits next to Router Throughput: 1 Gbps - so the note says which is which;
  • not modelled: the USB 3.0 WAN, because the catalogue has no USB interface type and inventing one for a single device would be worse than a note.

For the record, the route that unblocked this: curl the product page and grep for download.peplink.com/resources/*.pdf. The filenames are not guessable (peplink_br2_pro_datasheet.pdf, not peplink_max_br2_pro_5g_datasheet.pdf - every guessed variant returned 403). That should also reach #448, #452 and #471.

Modelled - `devices/peplink/max-br2-pro-5gn-t-prm.json`, commit `8a17219` on `fix/sfp-plus-connectors`. **The blocker was the page, not the product.** The product page draws its port diagram as an image, which is why this issue sat here - but the **datasheet PDF enumerates the same ports as text**: * `WAN Interface: 2x 10/100/1000/2500M Ethernet`, `2x 5G Modems with Redundant SIM Slots`, `1x USB 3.0 Interface`; * `LAN Interface: 4x 10/100/1000M Ethernet`; * `Simultaneous Dual-Band (2.4GHz / 5GHz) Wi-Fi 6, 2X2 MU-MIMO`, Wi-Fi WAN and/or AP; * serial **OOBM** port, named in the intro; * `Power over Ethernet 802.3at`, 12 W nominal / 30 W max, -40 to +65 C. Details worth having in a lab: * **The WAN side is faster than the LAN side** - 2.5G WAN against 1G LAN - and footnote 1 says "The WAN port can act as a LAN port if needed", which is recorded in the note rather than as five LAN ports; * **PoE-in is declared on one port only, flagged as such.** Footnote 5 says "802.3at PoE port provide a power supply of 25W" without naming the socket, so it is on `wan1` and not `wan2`: two simultaneous feeds is something the footnote does not support, and the feature's whole point is one cable for power and data; * **"Redundant SIM slots" is not a third modem** - it is a SIM switch inside each of the two modems, so there are two `wwan` ports; * the 5G ports carry the datasheet's own **theoretical maximum** (`5G: 4.1Gbps / 900Mbps`), which sits next to `Router Throughput: 1 Gbps` - so the note says which is which; * **not modelled:** the USB 3.0 WAN, because the catalogue has no USB interface type and inventing one for a single device would be worse than a note. For the record, the route that unblocked this: `curl` the product page and grep for `download.peplink.com/resources/*.pdf`. The filenames are not guessable (`peplink_br2_pro_datasheet.pdf`, not `peplink_max_br2_pro_5g_datasheet.pdf` - every guessed variant returned 403). That should also reach #448, #452 and #471.
Sign in to join this conversation.
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge#486
No description provided.