[Device]: Pepwave MAX BR1 ENT Enterprise Grade Router with LTE-A Failover #452

Closed
opened 2026-11-08 06:15:55 +00:00 by jaylouisw · 1 comment
Owner

Vendor

Peplink

Exact model name

Pepwave MAX BR1 ENT Enterprise Grade Router with LTE-A Failover

Category

Router

Ports and interfaces

  • See product page for full port list

Ports inferred from the 4gon product name; confirm against the product page.

PoE budget (watts)

None

Datasheet or product page URL

https://www.4gon.co.uk/pepwave-max-br1-ent-enterprise-grade-router-with-ltea-failover-p-6965.html

What do you want to model with it?

A router/gateway node in a routed lab (NAT, DHCP, VPN, cellular WAN).

Capabilities

routing, NAT, DHCP, l3-forward

Before submitting

  • I searched the catalog and existing issues, and this model is not there yet.
  • The port list above comes from a datasheet, not from memory or another wiki.
### Vendor Peplink ### Exact model name Pepwave MAX BR1 ENT Enterprise Grade Router with LTE-A Failover ### Category Router ### Ports and interfaces - See product page for full port list > Ports inferred from the 4gon product name; confirm against the product page. ### PoE budget (watts) None ### Datasheet or product page URL https://www.4gon.co.uk/pepwave-max-br1-ent-enterprise-grade-router-with-ltea-failover-p-6965.html ### What do you want to model with it? A router/gateway node in a routed lab (NAT, DHCP, VPN, cellular WAN). ### Capabilities routing, NAT, DHCP, l3-forward ### Before submitting - [x] I searched the catalog and existing issues, and this model is not there yet. - [x] The port list above comes from a datasheet, not from memory or another wiki.
jaylouisw referenced this issue from a commit 2026-11-08 06:43:31 +00:00
Author
Owner

Modelled - devices/peplink/max-br1-ent.json, commit 8001de8 on fix/sfp-plus-connectors.

The Peplink datasheet's spec block is explicit, and it is worth quoting because two details in it are easy to miss:

WAN Interface: 1x GE · USB Interface: 1x · Embedded LTE Modem with Redundant SIM Slots · LAN Interface: 2x GE · Power Output: Up to 2x 802.3af · Power Consumption Max.: 16W, Typical: 11W, Min.: 8W

  • This router is also a PSE. "Up to 2x 802.3af" means both LAN ports can power an access point - which is the whole point of an LTE router that backhauls a small Wi-Fi estate. Each LAN port carries poeOut: 15.4 (the 802.3af PSE ceiling). No poeBudget is declared, because "up to 2x" is a per-port statement and turning it into a shared ceiling is the PSU-rating-as-budget mistake (#527, #670);
  • one modem, not two - "redundant SIM slots" is a SIM switch inside the single embedded modem, the same reading as the MAX BR2 Pro (#486), so there is one wwan0;
  • the modem rate row quotes 300/50 Mbps for the LTE-A modem and 600/150 for the LTE-A Pro; this spec carries the base modem's 300M and names both;
  • the WAN port can be a LAN port ("WAN Port Convertible into LAN Port"), kept as a note rather than a third LAN port; the USB interface is not modelled.
Modelled - `devices/peplink/max-br1-ent.json`, commit `8001de8` on `fix/sfp-plus-connectors`. The Peplink datasheet's spec block is explicit, and it is worth quoting because two details in it are easy to miss: > **WAN Interface: 1x GE** · USB Interface: 1x · **Embedded LTE Modem with Redundant SIM Slots** · **LAN Interface: 2x GE** · **Power Output: Up to 2x 802.3af** · **Power Consumption Max.: 16W**, Typical: 11W, Min.: 8W * **This router is also a PSE.** "Up to 2x 802.3af" means both LAN ports can power an access point - which is the whole point of an LTE router that backhauls a small Wi-Fi estate. Each LAN port carries `poeOut: 15.4` (the 802.3af PSE ceiling). **No `poeBudget` is declared**, because "up to 2x" is a per-port statement and turning it into a shared ceiling is the PSU-rating-as-budget mistake (#527, #670); * **one modem, not two** - "redundant SIM slots" is a SIM switch inside the single embedded modem, the same reading as the MAX BR2 Pro (#486), so there is one `wwan0`; * the modem rate row quotes **300/50 Mbps for the LTE-A modem and 600/150 for the LTE-A Pro**; this spec carries the base modem's 300M and names both; * the **WAN port can be a LAN port** ("WAN Port Convertible into LAN Port"), kept as a note rather than a third LAN port; the USB interface is not modelled.
Sign in to join this conversation.
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge#452
No description provided.