[Device]: Peplink Pepwave AP One AC Mini (2.4GHz and 5.0GHz) #471
Labels
No milestone
No project
No assignees
1 participant
Notifications
Due date
No due date set.
Dependencies
No dependencies set.
Reference
jaylouisw/packetforge#471
Loading…
Add table
Add a link
Reference in a new issue
No description provided.
Delete branch "%!s()"
Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?
Vendor
Peplink
Exact model name
2.4GHz and 5.0GHz
Category
Wireless AP
Ports and interfaces
PoE budget (watts)
None
Datasheet or product page URL
https://www.4gon.co.uk/peplink-pepwave-ap-one-ac-mini-24ghz-and-50ghz-p-6331.html
What do you want to model with it?
A Wi-Fi access point in a wireless lab.
Capabilities
wireless, l2-forward
Before submitting
Modelled -
devices/peplink/apo-ac-mini.json, commit98890f4onfix/sfp-plus-connectors.The port count that kept blocking this turned out to be in the AP One series datasheet (
pepwave_apone_datasheet.pdf, reached from/products/wifi-poe/ap-one-series-mini/, which the site sitemap lists - the old/products/ap-one-ac-mini/URL 404s). The APO-AC-MINI row:Ethernet Port: 1x GE- one socket, which is both the uplink and the power inlet;Power Consumption: 9.5W (max.),Power Input: 802.3af PoE (Injector Not Included); package contents add a12V2A Power Supply (ACW-601), so it runs either way;Simultaneous 802.11ac wave 2 /ac/a/n and 802.11b/g/n, 2x2 MU-MIMO, **2.4 GHz: 300Mbps, 5GHz: 866Mbps**- both rates quoted, not inferred from the class.So
poeIn: 9.5on the single port, twowirelessinterfaces at 300M and 866M, and no PoE output of any kind: this is a powered device, not a PSE. An 802.3af injector powers it with margin, and the engine says so.Also for the record: 16 SSIDs per radio, 60 recommended clients, built-in 2.2/3 dBi omni antennas, plenum-rated indoor plastic, 150 g - bridge, NAT and WDS modes all supported, so the spec carries
bridgeandnattogether.