devices(ubiquiti): the Enterprise XG 24 drew 310.8 W it cannot take (refs #130) #2240

Merged
jaylouisw merged 1 commit from catalogue/1120-0152 into main 2026-11-20 02:08:43 +00:00
Owner

Refs #130. This is a catalogue repair under the Dream Wall Pro request, not an answer to it: the UDW-PRO census is still unpublished and that request stays open.

The defect. devices/ubiquiti/usw-enterprisexg-24.json declared 24 RJ45 ports with no poeIn, and the engine's isPoePd() matches "UniFi" in the label, so all 24 became 12.95 W 802.3af powered devices. Measured with the engine, not by reading:

before  eth0 poeIn = 12.95   device PD sum 310.80 W
        W_POE_DRAW: UniFi Switch Enterprise XG 24/eth0 is PoE-powered but plain host/eth0
        supplies no PoE; the device will need its own power supply.
after   eth0 poeIn = false   device PD sum 0.00 W
        warnings: (none)

310.8 W of draw on a unit the vendor caps at 100 W, and a warning per port on any cable to a source that supplies none.

Sources (both read 2026-11-20).

  • https://techspecs.ui.com/unifi/switching/usw-enterprisexg-24 - HTTP 200, 648,492 B, server-rendered. Prints 10 GbE RJ45 = 24 (10G/5G/2.5G/1G/100M), 25G SFP28 = 2 (25G/10G/1G), Max. Power Consumption 100W, Power Supply AC/DC, internal, 100W, Power Method (1) Universal input, 100-240V AC, 50/60 Hz / (1) USP RPS DC input. The strings PoE, PoE+ and 802.3 occur zero times in those bytes.
  • https://store.ui.com/us/en/products/usw-enterprisexg-24 - HTTP 200, 439,746 B. Every PoE spec row is "flag":"Empty": PoE support, Max. PoE Output, Total PoE Availability, PoE Ports (PoE / PoE+ / PoE++ / PoE+++), Max. PoE Wattage per Port by PSE. Its only PoE sentence is that these switches "are not compatible with the PoE++ requirements of the new E7 Access Points".
  • https://dl.ui.com/ds/usw-enterprisexg-24_ds.pdf - 200 with 609,911 B of techspecs home page, i.e. that host's not-found. No datasheet; the rendered spec table is the source.

What changed. poeIn: false on eth0-eth23, a notes block recording both readings and the arithmetic, and the description now says there is no PoE. No port count, rate, connector or capability moved: the page's two Port Layout rows are what the spec already carried, and the two SFP28 cages carry no power either way.

Gates. scripts/syntax-check.js 474 files OK; scripts/audit-port-types.js "No port contradicts its declared type"; scripts/audit-devices.js "No hard defects"; test/hardware-invariants.test.js 26 passed; test/spec-vs-description.test.js 3 passed; test/poe-inference.test.js 19 passed; test/poe.test.js 21 passed; test/validation.test.js 22 passed; scripts/check-control-bytes.js clean; scripts/regen-registry-doc.js unchanged. scripts/import-devices.js --dry-run refuses only two pre-existing duplicates in research/incoming/ (peplink MAX-BR1-PRO-5G, zte F8648P), nothing from this spec.

Left open, deliberately. The rest of the copper-only UniFi switch line shows the same silence (USW-Pro-48, USW-Pro-Max-48, USW-Pro-XG-48, US-48, USW-48, USW-24 - each 621.6 W or 310.8 W of inferred PD draw). Each needs its own page read, so each gets its own pass rather than a sweep from one datasheet.

Refs #130. This is a catalogue repair under the Dream Wall Pro request, not an answer to it: the UDW-PRO census is still unpublished and that request stays open. **The defect.** `devices/ubiquiti/usw-enterprisexg-24.json` declared 24 RJ45 ports with no `poeIn`, and the engine's `isPoePd()` matches "UniFi" in the label, so all 24 became 12.95 W 802.3af powered devices. Measured with the engine, not by reading: ``` before eth0 poeIn = 12.95 device PD sum 310.80 W W_POE_DRAW: UniFi Switch Enterprise XG 24/eth0 is PoE-powered but plain host/eth0 supplies no PoE; the device will need its own power supply. after eth0 poeIn = false device PD sum 0.00 W warnings: (none) ``` 310.8 W of draw on a unit the vendor caps at 100 W, and a warning per port on any cable to a source that supplies none. **Sources (both read 2026-11-20).** - https://techspecs.ui.com/unifi/switching/usw-enterprisexg-24 - HTTP 200, 648,492 B, server-rendered. Prints `10 GbE RJ45 = 24 (10G/5G/2.5G/1G/100M)`, `25G SFP28 = 2 (25G/10G/1G)`, `Max. Power Consumption 100W`, `Power Supply AC/DC, internal, 100W`, `Power Method (1) Universal input, 100-240V AC, 50/60 Hz / (1) USP RPS DC input`. The strings `PoE`, `PoE+` and `802.3` occur **zero** times in those bytes. - https://store.ui.com/us/en/products/usw-enterprisexg-24 - HTTP 200, 439,746 B. Every PoE spec row is `"flag":"Empty"`: PoE support, Max. PoE Output, Total PoE Availability, PoE Ports (PoE / PoE+ / PoE++ / PoE+++), Max. PoE Wattage per Port by PSE. Its only PoE sentence is that these switches "are not compatible with the PoE++ requirements of the new E7 Access Points". - https://dl.ui.com/ds/usw-enterprisexg-24_ds.pdf - 200 with 609,911 B of techspecs home page, i.e. that host's not-found. No datasheet; the rendered spec table is the source. **What changed.** `poeIn: false` on eth0-eth23, a `notes` block recording both readings and the arithmetic, and the description now says there is no PoE. No port count, rate, connector or capability moved: the page's two Port Layout rows are what the spec already carried, and the two SFP28 cages carry no power either way. **Gates.** `scripts/syntax-check.js` 474 files OK; `scripts/audit-port-types.js` "No port contradicts its declared type"; `scripts/audit-devices.js` "No hard defects"; `test/hardware-invariants.test.js` 26 passed; `test/spec-vs-description.test.js` 3 passed; `test/poe-inference.test.js` 19 passed; `test/poe.test.js` 21 passed; `test/validation.test.js` 22 passed; `scripts/check-control-bytes.js` clean; `scripts/regen-registry-doc.js` unchanged. `scripts/import-devices.js --dry-run` refuses only two pre-existing duplicates in `research/incoming/` (peplink MAX-BR1-PRO-5G, zte F8648P), nothing from this spec. **Left open, deliberately.** The rest of the copper-only UniFi switch line shows the same silence (USW-Pro-48, USW-Pro-Max-48, USW-Pro-XG-48, US-48, USW-48, USW-24 - each 621.6 W or 310.8 W of inferred PD draw). Each needs its own page read, so each gets its own pass rather than a sweep from one datasheet.
devices(ubiquiti): the Enterprise XG 24 drew 310.8 W it cannot take (refs #130)
All checks were successful
CI / Classify the change (pull_request) Successful in 17s
PR rebase / Rebase onto main and arm auto-merge (pull_request) Successful in 11s
CI / Server smoke and Docker build (pull_request) Has been skipped
CI / Test (Node 22) (pull_request) Successful in 1m3s
CI / Test (Node 20) (pull_request) Successful in 1m5s
CI / Test (Node 18) (pull_request) Successful in 1m10s
CI / Arm auto-merge (pull_request) Successful in 4s
321d21ec96
All 24 RJ45 ports were silent about PoE, so the engine's isPoePd() match on
"UniFi" made each a 12.95 W 802.3af powered device: 310.8 W on a unit the
vendor caps at 100 W. Vendor pages: techspecs.usw-enterprisexg-24 shows no PoE
row and zero occurrences of "PoE"/"802.3"; store page sets every PoE spec row
to flag Empty. All 24 now declare poeIn: false.

Refs #130 - the Dream Wall Pro request is unrelated and stays open.
forgejo-actions scheduled this pull request to auto merge when all checks succeed 2026-11-20 02:00:42 +00:00
jaylouisw deleted branch catalogue/1120-0152 2026-11-20 02:08:47 +00:00
Sign in to join this conversation.
No reviewers
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge!2240
No description provided.