D-Link DGS-1520: four Layer 3 stackable switches, 10GBASE-T beside SFP+ and 2.5G PoE #1667
No reviewers
Labels
No milestone
No project
No assignees
1 participant
Notifications
Due date
No due date set.
Dependencies
No dependencies set.
Reference
jaylouisw/packetforge!1667
Loading…
Add table
Add a link
Reference in a new issue
No description provided.
Delete branch "catalogue/1116-1325"
Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?
Adds the four members of the D-Link DGS-1520 (hardware Rev A1) Layer 3 stackable smart managed series. None of them were in the catalogue.
Source for every field: D-Link DGS-1520 Series A1 datasheet, https://www.dlink.com/us/en/-/media/business_products/dgs/dgs-1520/datasheet/dgs1520seriesa1datasheetv104ww.pdf (specification table + ordering information). Recorded per spec in
sourceUrl, inpoe.sourceUrland infabric.note.Why the MP models matter: they put four 2.5GBASE-T PoE ports on the same PoE bank as the gigabit ports - one budget, one standard row, not a separate zone - so a Wi-Fi 6 AP can sit above gigabit without a 10G run. Both MP models also carry 10GBASE-T copper and 10G SFP+ cages, which is a port-shape the catalogue had no example of before.
Arithmetic checked, not copied: every vendor capacity figure is the full-duplex aggregate of the declared census - 128 = 24x2 + 4x20, 140 = 20x2 + 4x5 + 4x20, 176 = 48x2 + 4x20, 188 = 44x2 + 4x5 + 4x20 - and each forwarding rate follows the same ports (1.488 Mpps per gigabit, 14.88 per 10G, 2.976 per 2.5G).
PoE budget noted, not smoothed over: 802.3af on all 24 PoE ports of the 28MP is 369.6 W and just fits inside the 370 W budget by 0.4 W; on the 48-port 52MP it does not fit, so roughly half the ports can run at 802.3af and only twelve at 802.3at 30 W. The 740 W figure requires the DPS-700 RPS, which the datasheet footnote restricts to A2/B1 hardware, so on these A1 units it is an upgrade path and the spec says so.
Not invented: the datasheet publishes the census and the media but no front-panel port index, so ports are named by media (
ge/mg/xgt/sfp+) rather than by a number the document does not state. The RJ-45 console port is modelled as a console interface because the datasheet lists it under "Console Port - RJ-45 port for out-of-band CLI management" on all four models.Gates:
node scripts/syntax-check.js350 files OK;node scripts/audit-port-types.js- no port contradicts its declared type;node scripts/audit-devices.js- no hard defects; full suitenode scripts/run-tests.js280 suites / 9,970 assertions / 0 failed; importer dry run on a fixture: 4 added, 0 rejected;docs/DEVICE_REGISTRY.mdregenerated (2,210 -> 2,214 models, L3 switch 206 -> 210).Specs:
devices/dlink/dgs-1520-{28,28mp,52,52mp}.json, research inputresearch/incoming/devices-dlink-dgs-1520.json.