Netonix: nine WISP switches with per-port passive PoE, real budgets and 115200 consoles #1560
No reviewers
Labels
No milestone
No project
No assignees
1 participant
Notifications
Due date
No due date set.
Dependencies
No dependencies set.
Reference
jaylouisw/packetforge!1560
Loading…
Add table
Add a link
Reference in a new issue
No description provided.
Delete branch "catalogue/1115-2256"
Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?
What this adds
The catalogue had exactly one Netonix model,
WS-12-250-AC, and it declared no PoE: nopoeblock, no
poeOuton any port, nopoe-psecapability. The simulator therefore believed a12-port passive-PoE WISP switch supplied no power at all. This PR fills in the family.
Added (8):
WS-12-250-DC,WS-12-400-AC,WS-12-DC,WS-26-400-AC,WS-26-400-IDC,WS-26-500-DC,WS-8-150-AC,WS-6-MINICorrected (1):
WS-12-250-ACnow carries its 250 W ceiling, a PSE flag on all 12 copperports, the
sfpcages as cages, the console port, the fabric figure and the notes the othermembers carry.
Sources
https://netonix.com/<model>.html(one per model, full table in each spec'ssourceUrlandpoe.sourceUrl)Every field in these specs carries the URL it came from; the
notesstring names the PDF wherea fact came from it and the store page where it came from that.
PoE modelling, and why there is no wattage class
These are not 802.3 PSEs. They source software-selectable passive PoE: 24 V and 48 V at 1 A on
pins 4,5(+)/7,8(-), 24VH and 48VH at 2 A on all four pairs, with a current sensor per port. A
port's wattage is whatever voltage and current limit a human picks, so
poeOutistrue(thisport sources power) rather than a class number, and the numbers that do appear are the vendor's
own ceilings:
WS-12-250-AC,WS-12-250-DC: 250 W max consumption. The DC model's store page is explicitthat the budget tracks input voltage: 250 W above 12 V in, 200 W above 11 V, 150 W below 10 V.
WS-12-400-AC: 400 W supply rating (the sheet printsN/Afor max consumption).WS-12-DC:budgetUnknown. Its 48 V output is a pass-through of the 37-54 VDC input and theunit only draws 4-10 W itself, so any number would be an invention about someone else's supply.
WS-26-400-AC/-IDC: 400 W,WS-26-500-DC: 500 W,WS-8-150-AC: 150 W,WS-6-MINI: 100 W (of which the switch takes 4 W).WS-6-MINIis the interesting one: it is a powered device as well as a PSE. Port 1 takespassive 48VH on all four pairs (48-56 V, up to 2 A) from another WISP switch, or a 48-54 V
barrel supply, and no other port sources power off a 2-pair 48 V adapter. It declares
poe-pdwithpoeIn: 100on port 1 andpoeOuton ports 2-6.Discrepancies, stated not smoothed
summed one-directionally, 26 Gbps is 24x1G + 2x1G. A FortiSwitch in this same catalogue calls
24x1G + 4x10G "128 Gbps" by doubling. Like for like, these Netonix numbers would be 28 and 52.
The
fabric.noteon each spec says so, because a bare comparison against other vendors'"switching capacity" would be wrong by 2x in the opposite direction.
WS-8-150-AC's spec sheet claims 14 Gbps of line rate for eight gigabit ports. That is the12-port row copied down: eight gigabit ports cannot exceed 8 Gbps. The port count itself is not
in doubt (store page, PoE table and faceplate art all say 8, no SFP), so the spec is included
with no
fabricblock rather than with a figure the sheet cannot support.one thing the evidence rule forbids:
WS-26-DC: store page says "Managed passive POE Switch (12) Gbps POE Ports (2) SFP";the spec sheet's PoE table says ports 01-24 and its faceplate art shows 1/2 through 23/24
plus 25/26. 12+2 and 24+2 cannot both be true.
WS-8-150-DC: store page says "Managed 6 Port POE Switch + 2 SFP Uplink Ports" and its PoEtable says ports 01-06; the spec sheet says "(3) 10/100/1000 Ethernet Ports (2) SFP" and its
PoE table says ports 01-08.
Both need a vendor photo or a unit in hand before they enter the catalogue.
Validation
End-to-end PoE check, because a family that suddenly sources power should be seen doing it:
That is the WISP pattern these boxes exist for: one tower switch feeding a small PoE-powered
switch up the mast.
Unverifiable / left alone
pages, and the spec sheet is undated beyond its 2018 copyright.
WS-26-DCandWS-8-150-DC, as above.burst of requests); the archived snapshots are 2023-2026 and are the same copy as the live
page where both were readable.
d1cdf2ac8fd16549f609This branch conflicts with
main, so it was not rebased:A conflict is a decision about behaviour rather than a mechanical fix, so this is left for a human. Rebasing by hand and force-pushing will let the automation pick it up again.
This branch conflicts with
main, so it was not rebased:A conflict is a decision about behaviour rather than a mechanical fix, so this is left for a human. Rebasing by hand and force-pushing will let the automation pick it up again.
d16549f60920ec902a7a20ec902a7ae2b3fd1201This branch conflicts with
main, so it was not rebased:A conflict is a decision about behaviour rather than a mechanical fix, so this is left for a human. Rebasing by hand and force-pushing will let the automation pick it up again.
This branch conflicts with
main, so it was not rebased:A conflict is a decision about behaviour rather than a mechanical fix, so this is left for a human. Rebasing by hand and force-pushing will let the automation pick it up again.