[Device]: NetEngine 8000 M6 #796

Closed
opened 2026-11-08 06:21:00 +00:00 by jaylouisw · 3 comments
Owner

Vendor

Huawei

Exact model name

NetEngine 8000 M6

Category

Router

Ports and interfaces

  • Modular chassis, 6 service slots
  • Switching capacity 320 Gbps, forwarding 72 Mpps

PoE budget (watts)

None (no PoE output)

Datasheet or product page URL

https://e.huawei.com/en/products/routers/ne8000

What do you want to model with it?

Enterprise WAN access/aggregation node.

Capabilities

l3-forward, cli, mpls, bgp, nat, firewall

Before submitting

  • I searched the catalog and existing issues, and this model is not there yet.
  • The port list above comes from a datasheet, not from memory or another wiki.
### Vendor Huawei ### Exact model name NetEngine 8000 M6 ### Category Router ### Ports and interfaces - Modular chassis, 6 service slots - Switching capacity 320 Gbps, forwarding 72 Mpps ### PoE budget (watts) None (no PoE output) ### Datasheet or product page URL https://e.huawei.com/en/products/routers/ne8000 ### What do you want to model with it? Enterprise WAN access/aggregation node. ### Capabilities l3-forward, cli, mpls, bgp, nat, firewall ### Before submitting - [x] I searched the catalog and existing issues, and this model is not there yet. - [x] The port list above comes from a datasheet, not from memory or another wiki.
Author
Owner

Closing status: blocked on a stated configuration, and now recorded as such in the repository.

Huawei's NetEngine 8000 page (https://e.huawei.com/en/products/routers/ne8000.html) publishes, for every model in the family, switching capacity, forwarding performance, capacity density and typical power - but not a port census. The fixed-configuration members say so explicitly ("Fixed-configuration router does not support flexible cards"), and even for those the port list is not on the page; the chassis members publish slots and per-slot capacity ("19.2 Tbit/s per slot ... 42 x 400 GE or 72 x 100 GE") rather than ports that exist in an unconfigured frame.

Modelling the maximum would let a lab cable 72 x 100 GE into a chassis with one card; picking a representative card set would be inventing an order. So the issue stays open, and docs/DEVICE_REGISTRY.md §"What is left open, and why" records why for the whole family (#789, #790, #795, #796, #797, #799, #800, #801, #802).

What would close it: one line naming the configuration - "NetEngine 8000 X8 with two 36x100GE boards and one 8x100GE" - and the ports follow directly from Huawei's per-board tables.

Closing status: **blocked on a stated configuration**, and now recorded as such in the repository. Huawei's NetEngine 8000 page (`https://e.huawei.com/en/products/routers/ne8000.html`) publishes, for every model in the family, switching capacity, forwarding performance, capacity density and typical power - but **not a port census**. The fixed-configuration members say so explicitly ("Fixed-configuration router does not support flexible cards"), and even for those the port list is not on the page; the chassis members publish slots and per-slot capacity ("19.2 Tbit/s per slot ... 42 x 400 GE or 72 x 100 GE") rather than ports that exist in an unconfigured frame. Modelling the maximum would let a lab cable 72 x 100 GE into a chassis with one card; picking a representative card set would be inventing an order. So the issue stays open, and `docs/DEVICE_REGISTRY.md` §"What is left open, and why" records why for the whole family (#789, #790, #795, #796, #797, #799, #800, #801, #802). **What would close it:** one line naming the configuration - "NetEngine 8000 X8 with two 36x100GE boards and one 8x100GE" - and the ports follow directly from Huawei's per-board tables.
Author
Owner

Re-checked against the M6's own primary documents; still blocked, but the blocker is now a vendor statement rather than an inference. PR #1777 records it and does not close this issue.

Sources read on 2026-11-17:

What the M6 is. Table 1-29, "Slots on the NetEngine 8000 M6": PIC DC 1-6 / AC 2, 4-6; CXP 7, 8; PIU DC 9, 10 / AC 1, 3; FAN 11. There is no fixed-interface row. Tables 1-30/1-31: DC chassis 11 slots, 6 service board slots; AC 9 slots, 4 service board slots; and a maximum-port block - "Maximum number of physical ports on the entire device: 100", 25GE 6, 10GE 16, 50GE 2, 100GE NA, 40GE NA - which is a maximum over six fitted cards, not a panel. An AC M6 has four service slots and cannot reach those numbers at all.

Why it stays open. The datasheet's basic-configuration BOMs settle it: CR8PM6BASDC1 / CR8PM6BASAC1 / CR8PM6BASDC3 / CR8PM6BASAC3 are "NetEngine 8000 M6 Chassis, 2CXP-160(-B), 2DC/AC Power, without Software Charge and Document" - no PIC. Every interface card is a separate BOM line. So an M6 as ordered has no cableable port; modelling the bare model would mean an entry with no ports, and modelling a representative card set would be inventing an order.

Exact missing field: which PICs are fitted, and in which slots - and therefore the port census itself.

What would close it: one line in Huawei part numbers, e.g. "NetEngine 8000 M6 (DC), slots 1-2 = CR8D00L4XFC0 (4x 10GE/GE), slots 3-4 = CR8D00EAGFC0 (10x GE SFP)". For convenience the hardware description already quotes two of its own reference configurations for power measurement - 2CR8D00L4XFC0 + 2CR8D00EAGFC0 = 196.1 W, and 2CR8D00E1VBC0 + 1CR8D00L4XFC0 + 1*CR8D00EAGFC0 = 205.8 W - which are the most likely lab builds (8x 10GE + 20x GE, or 2x 50GE + 4x 10GE + 10x GE). Naming one of those, or your own, converts this to a spec in one step.

The structural fix is unchanged from #797: the catalogue expresses a flat port list, so "6 PIC slots, card-dependent" has no honest representation. A slot list plus a card list would end this class of blocker for #789, #796, #797, #799, #800, #801 and #802 at once.

**Re-checked against the M6's own primary documents; still blocked, but the blocker is now a vendor statement rather than an inference.** PR #1777 records it and does not close this issue. Sources read on 2026-11-17: - https://support.huawei.com/enterprise/en/doc/EDOC1100382052/374d9a7/netengine-8000-m6 - *NetEngine 8000 M6, M1D, and M1C V800R023C10SPC500 Hardware Description*, read whole with a crawler user-agent (HTTP 200, 526,382 bytes; a desktop UA still gets 403). - https://e.huawei.com/marketingcloud/pep/asset/20000001/Material/b50df453e4bf4ca4b99ef855437e8cc9/M3T1A590N1140254128116289674/NetEngine%208000%20M6%20Universal%20Service%20Router%20Datasheet.pdf - current datasheet. - https://data.nag.wiki/Huawei/Datasheet/NE8000/8000M6.pdf - earlier datasheet revision, 12 pages, still carries the Ordering Information section. **What the M6 is.** Table 1-29, "Slots on the NetEngine 8000 M6": PIC **DC 1-6 / AC 2, 4-6**; CXP 7, 8; PIU **DC 9, 10 / AC 1, 3**; FAN 11. **There is no fixed-interface row.** Tables 1-30/1-31: DC chassis **11 slots, 6 service board slots**; AC **9 slots, 4 service board slots**; and a maximum-port block - "Maximum number of physical ports on the entire device: 100", 25GE 6, 10GE 16, 50GE 2, 100GE **NA**, 40GE **NA** - which is a maximum over six fitted cards, not a panel. An AC M6 has four service slots and cannot reach those numbers at all. **Why it stays open.** The datasheet's basic-configuration BOMs settle it: `CR8PM6BASDC1` / `CR8PM6BASAC1` / `CR8PM6BASDC3` / `CR8PM6BASAC3` are "NetEngine 8000 M6 Chassis, 2*CXP-160(-B), 2*DC/AC Power, without Software Charge and Document" - **no PIC**. Every interface card is a separate BOM line. So an M6 as ordered has no cableable port; modelling the bare model would mean an entry with no ports, and modelling a representative card set would be inventing an order. **Exact missing field:** which PICs are fitted, and in which slots - and therefore the port census itself. **What would close it:** one line in Huawei part numbers, e.g. "NetEngine 8000 M6 (DC), slots 1-2 = CR8D00L4XFC0 (4x 10GE/GE), slots 3-4 = CR8D00EAGFC0 (10x GE SFP)". For convenience the hardware description already quotes two of its own reference configurations for power measurement - 2*CR8D00L4XFC0 + 2*CR8D00EAGFC0 = 196.1 W, and 2*CR8D00E1VBC0 + 1*CR8D00L4XFC0 + 1*CR8D00EAGFC0 = 205.8 W - which are the most likely lab builds (8x 10GE + 20x GE, or 2x 50GE + 4x 10GE + 10x GE). Naming one of those, or your own, converts this to a spec in one step. The structural fix is unchanged from #797: the catalogue expresses a flat port list, so "6 PIC slots, card-dependent" has no honest representation. A slot list plus a card list would end this class of blocker for #789, #796, #797, #799, #800, #801 and #802 at once.
Author
Owner

Closing status: modelled, PR #1911. devices/huawei/netengine-8000-m6.json - 16 ports, and the build is the vendor's own.

This thread's last verdict was right that the DC typical configurations leave slots empty, but it was measured against the DC chassis (11 slots / 6 service slots). The row that settles the M6 is the AC pair in Table 1-31 of EDOC1100382052:

[CXP-160/CXP-160-B]AC Typical configuration 2: 2CXP+1FAN+2AC power+2CR8D00E1VBC0+1CR8D00L4XFC0 + 1CR8D00EAGFC0 =220.07 W

Four PICs against the AC chassis' 4 service slots (9 slots in all) - it fills the chassis exactly, which is the criterion that made the M8 row usable in #1802. Card counts from the vendor Hardware Guide EDOC1100264779 (Issue 05, 2023-03-31), each card's own chapter: CR8D00E1VBC0 1x50GE QSFP28 (3.4.5.42), CR8D00L4XFC0 4x10GE/GE SFP+ (3.4.5.52), CR8D00EAGFC0 10x GE/FE SFP (3.4.5.56) => 2x 50GE + 4x 10GE + 10x GE.

Not asserted: card-to-slot assignment (flat port names), ETH management port count, and the other PICs the M6 can take. Full trail in research/huawei-netengine-8000-m-series-slots.md.

**Closing status: modelled, PR #1911.** `devices/huawei/netengine-8000-m6.json` - 16 ports, and the build is the vendor's own. This thread's last verdict was right that the DC typical configurations leave slots empty, but it was measured against the **DC** chassis (11 slots / 6 service slots). The row that settles the M6 is the **AC** pair in Table 1-31 of `EDOC1100382052`: > [CXP-160/CXP-160-B]AC Typical configuration 2: 2*CXP+1*FAN+2*AC power+2*CR8D00E1VBC0+1*CR8D00L4XFC0 + 1*CR8D00EAGFC0 =220.07 W Four PICs against the AC chassis' **4 service slots** (9 slots in all) - it fills the chassis exactly, which is the criterion that made the M8 row usable in #1802. Card counts from the vendor Hardware Guide `EDOC1100264779` (Issue 05, 2023-03-31), each card's own chapter: `CR8D00E1VBC0` 1x50GE QSFP28 (3.4.5.42), `CR8D00L4XFC0` 4x10GE/GE SFP+ (3.4.5.52), `CR8D00EAGFC0` 10x GE/FE SFP (3.4.5.56) => 2x 50GE + 4x 10GE + 10x GE. Not asserted: card-to-slot assignment (flat port names), ETH management port count, and the other PICs the M6 can take. Full trail in `research/huawei-netengine-8000-m-series-slots.md`.
Sign in to join this conversation.
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge#796
No description provided.