[Device]: OptiXaccess MA5800 Series #783

Closed
opened 2026-11-08 06:20:39 +00:00 by jaylouisw · 2 comments
Owner

Vendor

Huawei

Exact model name

OptiXaccess MA5800 Series

Category

OLT (PON headend)

Ports and interfaces

  • Chassis OLT family: MA5800-X17 / -X15 / -X7 / -X2
  • Multi-slot subracks with GPON/XG(S)-PON/Combo PON line cards

PoE budget (watts)

None (no PoE output)

Datasheet or product page URL

https://e.huawei.com/en/products/optical-access/ma5800

What do you want to model with it?

ISP/enterprise aggregation OLT for FTTH/FTTB.

Capabilities

olt, pon (GPON/XG-PON/XGS-PON), l2-forward, cli

Note: Catalog already has MA5800-X2 and MA5800-X7; this covers the X15/X17 and full series.

Before submitting

  • I searched the catalog and existing issues, and this model is not there yet.
  • The port list above comes from a datasheet, not from memory or another wiki.
### Vendor Huawei ### Exact model name OptiXaccess MA5800 Series ### Category OLT (PON headend) ### Ports and interfaces - Chassis OLT family: MA5800-X17 / -X15 / -X7 / -X2 - Multi-slot subracks with GPON/XG(S)-PON/Combo PON line cards ### PoE budget (watts) None (no PoE output) ### Datasheet or product page URL https://e.huawei.com/en/products/optical-access/ma5800 ### What do you want to model with it? ISP/enterprise aggregation OLT for FTTH/FTTB. ### Capabilities olt, pon (GPON/XG-PON/XGS-PON), l2-forward, cli > Note: Catalog already has MA5800-X2 and MA5800-X7; this covers the X15/X17 and full series. ### Before submitting - [x] I searched the catalog and existing issues, and this model is not there yet. - [x] The port list above comes from a datasheet, not from memory or another wiki.
Author
Owner

Not closing this one, but the blocker is now named precisely so it can be finished quickly.

The MA5800 .html page does render a full model table (X17 / X15 / X7 / X2), and it gives:

  • board configuration per subrack - e.g. X17: control-board slots 9,10; service/upstream slots 1-8 and 11-19; universal slot 0; power slots 20,21;
  • maximum ports per subrack - X17: 272 GPON / 272 XGS-PON Combo / 816 GE-FE / 408 10GE-GE; X15: 240; X7: 112; X2: 32;
  • upstream ports per control board - MPLA/MPLB: 8x 10GE/GE, MPLG: 2x 100GE + 4x 10GE/GE, MPLH: 4x 100GE + 8x 25GE/10GE/GE, MPSD-G: 8x 10GE/GE.

Every one of those is a capacity, not a census. A chassis OLT has no fixed ports: it has slots, and which ports exist depends on which service boards and which control board are fitted. Modelling X17 as a 272-PON device would let a lab cable 272 PONs into a frame that might have sixteen; modelling it as a 16-PON device would be equally invented.

So the request needs the same thing the FS NC8200/NC8400 chassis (#757/#760) need: a stated configuration - "MA5800-X7 with one MPLB control board and three GPHF service boards" - and then the ports fall out of the board tables. That is a decision a requester can make in one line; it is not something a spec file should invent.

(For contrast, #787/#784/#786 - the EA5801E, MA5801 and EA5801S - are box OLTs where Huawei publishes a fixed port count per model, which is why those closed.)

Not closing this one, but the blocker is now named precisely so it can be finished quickly. The MA5800 `.html` page **does** render a full model table (X17 / X15 / X7 / X2), and it gives: * **board configuration** per subrack - e.g. X17: control-board slots 9,10; service/upstream slots 1-8 and 11-19; universal slot 0; power slots 20,21; * **maximum ports per subrack** - X17: 272 GPON / 272 XGS-PON Combo / 816 GE-FE / 408 10GE-GE; X15: 240; X7: 112; X2: 32; * **upstream ports per control board** - MPLA/MPLB: 8x 10GE/GE, MPLG: 2x 100GE + 4x 10GE/GE, MPLH: 4x 100GE + 8x 25GE/10GE/GE, MPSD-G: 8x 10GE/GE. Every one of those is a **capacity, not a census**. A chassis OLT has no fixed ports: it has slots, and which ports exist depends on which service boards and which control board are fitted. Modelling X17 as a 272-PON device would let a lab cable 272 PONs into a frame that might have sixteen; modelling it as a 16-PON device would be equally invented. So the request needs the same thing the FS NC8200/NC8400 chassis (#757/#760) need: **a stated configuration** - "MA5800-X7 with one MPLB control board and three GPHF service boards" - and then the ports fall out of the board tables. That is a decision a requester can make in one line; it is not something a spec file should invent. (For contrast, #787/#784/#786 - the EA5801E, MA5801 and EA5801S - are *box* OLTs where Huawei publishes a fixed port count per model, which is why those closed.)
Author
Owner

Closing: the whole MA5800 series is now in the catalogue, each model as one stated configuration. The blocker named in the 2026-11-10 comment — "capacity, not a census" — was resolved by modelling a named card set rather than the shelf maximum, and all four subracks now exist:

spec shelf stated configuration ports
devices/huawei/ma5800-x17.json 11U, 22 slots (service/upstream 1–8, 11–19; control 9, 10; universal 0; power 20, 21) 1x H901GPHF 16-port GPON in slot 1 + 1x H901MPLA 4x GE/10GE SFP+ 21 (16 GPON + 4 uplinks + 1 mgmt)
devices/huawei/ma5800-x15.json 11U, 20 slots, 240 GPON capacity same configuration 21
devices/huawei/ma5800-x7.json 6U, 7 service slots, 112 GPON capacity same configuration 21
devices/huawei/ma5800-x2.json 1U, 2 service slots, 32 GPON capacity same configuration 21

Source for every row: Huawei's MA5800 specification table, https://e.huawei.com/en/products/optical-access/ma5800 — board configuration per subrack, "GPON ports 272 / XG-PON 272 / XGS-PON 272" (X17) down to 32 (X2), and the board table the configuration names: H901MPLA "4x GE / 10GE upstream" (which is why the uplinks are xge0/1-4), H901GPHF "16 GPON ports", plus H901XGHD / H901TWED / H901OGHK / H901OXHD / H901NXED as the alternatives a requester can name instead.

The 272 figure stays in the description and notes as capacity, not as ports: cabling 272 PONs into a frame holding one 16-port card is the failure mode this modelling avoids. A different card set is a one-line change — name it ("X7 with MPLG and three H901OGHK") and the ports follow from the same board table.

X17 landed as 969c999c (PR #1650); X15/X7/X2 have been in the catalogue since the optical-access import. Nothing here is guessed, and no PoE is declared: a PON subrack sources no power on its PON ports.

Closing: **the whole MA5800 series is now in the catalogue, each model as one stated configuration.** The blocker named in the 2026-11-10 comment — "capacity, not a census" — was resolved by modelling a named card set rather than the shelf maximum, and all four subracks now exist: | spec | shelf | stated configuration | ports | | --- | --- | --- | --- | | `devices/huawei/ma5800-x17.json` | 11U, 22 slots (service/upstream 1–8, 11–19; control 9, 10; universal 0; power 20, 21) | 1x H901GPHF 16-port GPON in slot 1 + 1x H901MPLA 4x GE/10GE SFP+ | 21 (16 GPON + 4 uplinks + 1 mgmt) | | `devices/huawei/ma5800-x15.json` | 11U, 20 slots, 240 GPON capacity | same configuration | 21 | | `devices/huawei/ma5800-x7.json` | 6U, 7 service slots, 112 GPON capacity | same configuration | 21 | | `devices/huawei/ma5800-x2.json` | 1U, 2 service slots, 32 GPON capacity | same configuration | 21 | Source for every row: Huawei's MA5800 specification table, `https://e.huawei.com/en/products/optical-access/ma5800` — board configuration per subrack, "GPON ports 272 / XG-PON 272 / XGS-PON 272" (X17) down to 32 (X2), and the board table the configuration names: H901MPLA "4x GE / 10GE upstream" (which is why the uplinks are `xge0/1-4`), H901GPHF "16 GPON ports", plus H901XGHD / H901TWED / H901OGHK / H901OXHD / H901NXED as the alternatives a requester can name instead. The 272 figure stays in the description and notes as **capacity**, not as ports: cabling 272 PONs into a frame holding one 16-port card is the failure mode this modelling avoids. A different card set is a one-line change — name it ("X7 with MPLG and three H901OGHK") and the ports follow from the same board table. X17 landed as `969c999c` (PR #1650); X15/X7/X2 have been in the catalogue since the optical-access import. Nothing here is guessed, and no PoE is declared: a PON subrack sources no power on its PON ports.
Sign in to join this conversation.
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge#783
No description provided.