Huawei MA5800-X17: complete the subrack series with a stated configuration #1650

Merged
jaylouisw merged 1 commit from catalogue/1116-1055 into main 2026-11-16 11:06:43 +00:00
Owner

Fixes #783

Adds devices/huawei/ma5800-x17.json — the only subrack of the MA5800 family the catalogue was missing. X2, X7 and X15 were already modelled, each as one explicitly stated configuration (one H901GPHF 16-port GPON card in slot 1 plus the uplinks of a single control board); X17 now follows the same convention, which is what the issue was waiting for.

What the source says

https://e.huawei.com/en/products/optical-access/ma5800, MA5800-X17 column of the specification table:

field value
board configuration control slots 9, 10; service/upstream slots 1–8, 11–19; universal slot 0; power slots 20, 21
GPON / XG-PON / XGS-PON ports 272 / 272 / 272 (capacity with every service slot filled)
upstream ports MPLA/MPLB 8x 10GE/GE; MPLG 2x 100GE + 4x 10GE/GE; MPLH 4x 100GE + 8x 25GE/10GE/GE — with both control boards carrying upstream traffic
payload switching capacity MPLA 3.6, MPLB 7.0, MPLG 7.3, MPLH 8.0 Tbit/s (load sharing)
per-service-slot bandwidth MPLA 100 Gbit/s, MPLB/MPLG/MPLH 200 Gbit/s
dimensions / weight 493 x 287 x 486 mm excluding ears (535 with), 45 kg fully loaded
power −38.4 to −72 V DC, 60 A max input, dual power boards

Board table on the same page: H901MPLA “4x GE / 10GE upstream, load sharing” (one board = 4 uplinks, hence xge0/1-4), H901GPHF “16 GPON ports”.

Why the ports are 21 and not 272

272 is what the shelf can hold, not what it has: an OLT subrack has no ports until service boards are fitted. The spec therefore models a stated configuration — 16 GPON (gpon1/1-16, SC/APC) + 4x 10GE SFP+ + mgmt0 — and records the 272/816/408 capacity figures, the MPLG/MPLH 100GE options and the board list in notes. The description says this in its first sentence, so nobody can read the model as a port census.

The issue also asked for “GPON/XG-PON/XGS-PON” capabilities: the engine's vocabulary has no olt/pon token (engine/device.js), so the spec declares the capabilities that exist — l2-forward, l3-forward, cli, dhcp-server, dhcp-client — exactly as X7 and X15 do. No PoE: an OLT sources no power over its PON ports.

Gates

  • node scripts/syntax-check.js — 348 files, all OK
  • node scripts/import-devices.js (scoped PF_INCOMING) — 1 scanned, 1 added, 0 rejected
  • node scripts/audit-port-types.js — exit 0; the 7 pre-existing 10G-as-RJ45 template warnings are unchanged
  • node scripts/run-tests.js — 278 suites, 9908 assertions, 1 failure: test/property-validator.test.js E_BIDI_MISMATCH under seed 65, reproduced identically on origin/main (2201 fixtures) so it is not from this change
  • docs/DEVICE_REGISTRY.md regenerated (2,201 → 2,202 models; Huawei 85 → 86)

Nothing unverifiable is claimed: every number above is quoted from the page in notes.

Fixes #783 Adds `devices/huawei/ma5800-x17.json` — the only subrack of the MA5800 family the catalogue was missing. X2, X7 and X15 were already modelled, each as one **explicitly stated configuration** (one H901GPHF 16-port GPON card in slot 1 plus the uplinks of a single control board); X17 now follows the same convention, which is what the issue was waiting for. ## What the source says `https://e.huawei.com/en/products/optical-access/ma5800`, MA5800-X17 column of the specification table: | field | value | |---|---| | board configuration | control slots 9, 10; service/upstream slots 1–8, 11–19; universal slot 0; power slots 20, 21 | | GPON / XG-PON / XGS-PON ports | 272 / 272 / 272 (capacity with every service slot filled) | | upstream ports | MPLA/MPLB 8x 10GE/GE; MPLG 2x 100GE + 4x 10GE/GE; MPLH 4x 100GE + 8x 25GE/10GE/GE — with *both* control boards carrying upstream traffic | | payload switching capacity | MPLA 3.6, MPLB 7.0, MPLG 7.3, MPLH 8.0 Tbit/s (load sharing) | | per-service-slot bandwidth | MPLA 100 Gbit/s, MPLB/MPLG/MPLH 200 Gbit/s | | dimensions / weight | 493 x 287 x 486 mm excluding ears (535 with), 45 kg fully loaded | | power | −38.4 to −72 V DC, 60 A max input, dual power boards | Board table on the same page: **H901MPLA** “4x GE / 10GE upstream, load sharing” (one board = 4 uplinks, hence `xge0/1-4`), **H901GPHF** “16 GPON ports”. ## Why the ports are 21 and not 272 272 is what the shelf can hold, not what it has: an OLT subrack has no ports until service boards are fitted. The spec therefore models a stated configuration — 16 GPON (gpon1/1-16, SC/APC) + 4x 10GE SFP+ + mgmt0 — and records the 272/816/408 capacity figures, the MPLG/MPLH 100GE options and the board list in `notes`. The description says this in its first sentence, so nobody can read the model as a port census. The issue also asked for “GPON/XG-PON/XGS-PON” capabilities: the engine's vocabulary has no `olt`/`pon` token (`engine/device.js`), so the spec declares the capabilities that exist — `l2-forward`, `l3-forward`, `cli`, `dhcp-server`, `dhcp-client` — exactly as X7 and X15 do. No PoE: an OLT sources no power over its PON ports. ## Gates * `node scripts/syntax-check.js` — 348 files, all OK * `node scripts/import-devices.js` (scoped `PF_INCOMING`) — 1 scanned, 1 added, 0 rejected * `node scripts/audit-port-types.js` — exit 0; the 7 pre-existing 10G-as-RJ45 template warnings are unchanged * `node scripts/run-tests.js` — 278 suites, 9908 assertions, 1 failure: `test/property-validator.test.js` `E_BIDI_MISMATCH` under seed 65, **reproduced identically on `origin/main`** (2201 fixtures) so it is not from this change * `docs/DEVICE_REGISTRY.md` regenerated (2,201 → 2,202 models; Huawei 85 → 86) Nothing unverifiable is claimed: every number above is quoted from the page in `notes`.
Huawei MA5800-X17: complete the subrack series with a stated configuration (#783)
Some checks failed
CI / Classify the change (pull_request) Successful in 13s
PR rebase / Rebase onto main and arm auto-merge (pull_request) Successful in 16s
CI / Server smoke test (pull_request) Has been skipped
CI / Docker build (pull_request) Has been skipped
CI / Test (Node 18) (pull_request) Failing after 1m22s
CI / Test (Node 20) (pull_request) Failing after 1m26s
CI / Test (Node 22) (pull_request) Failing after 1m38s
0dbc18d796
The MA5800 family was three-quarters modelled: X2, X7 and X15 each describe one
explicitly stated configuration (one H901GPHF 16-port GPON card in slot 1 plus
the 4x GE/10GE uplinks of a single control board), and X17 was missing.

X17 is the same shelf one size up: 22 slots, of which 17 carry service or
upstream boards (1-8 and 11-19), control boards sit in 9 and 10, the universal
interface board in 0 and the power boards in 20 and 21. Huawei's specification
table gives the shelf's capacity in that configuration - 272 GPON, 272 XG-PON
or 272 XGS-PON ports, 816 GE/FE, 408 10GE/GE - which are capacities, not a
census, so they stay in notes and the interface list is the stated
configuration: 16 GPON (gpon1/1-16, SC/APC) + 4x 10GE SFP+ (xge0/1-4, single
MPLA) + mgmt0 = 21 ports.

Source: https://e.huawei.com/en/products/optical-access/ma5800 (MA5800-X17
column of the specification table, plus the control/service board table).
jaylouisw scheduled this pull request to auto merge when all checks succeed 2026-11-16 11:06:33 +00:00
Sign in to join this conversation.
No reviewers
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge!1650
No description provided.