D-Link DGS-1520: four Layer 3 stackable switches, 10GBASE-T beside SFP+ and 2.5G PoE #1667

Merged
jaylouisw merged 1 commit from catalogue/1116-1325 into main 2026-11-16 13:34:13 +00:00
Owner

Adds the four members of the D-Link DGS-1520 (hardware Rev A1) Layer 3 stackable smart managed series. None of them were in the catalogue.

model ports PoE capacity forwarding
DGS-1520-28 24x 1G RJ45 + 2x 10GBASE-T + 2x 10G SFP+ none 128 Gbps 95.24 Mpps
DGS-1520-28MP 20x 1G PoE + 4x 2.5GBASE-T PoE + 2x 10GBASE-T + 2x 10G SFP+ 802.3af/at, 370 W (740 W with DPS-700) 140 Gbps 104.16 Mpps
DGS-1520-52 48x 1G RJ45 + 2x 10GBASE-T + 2x 10G SFP+ none 176 Gbps 130.95 Mpps
DGS-1520-52MP 44x 1G PoE + 4x 2.5GBASE-T PoE + 2x 10GBASE-T + 2x 10G SFP+ 802.3af/at, 370 W (740 W with DPS-700) 188 Gbps 139.88 Mpps

Source for every field: D-Link DGS-1520 Series A1 datasheet, https://www.dlink.com/us/en/-/media/business_products/dgs/dgs-1520/datasheet/dgs1520seriesa1datasheetv104ww.pdf (specification table + ordering information). Recorded per spec in sourceUrl, in poe.sourceUrl and in fabric.note.

Why the MP models matter: they put four 2.5GBASE-T PoE ports on the same PoE bank as the gigabit ports - one budget, one standard row, not a separate zone - so a Wi-Fi 6 AP can sit above gigabit without a 10G run. Both MP models also carry 10GBASE-T copper and 10G SFP+ cages, which is a port-shape the catalogue had no example of before.

Arithmetic checked, not copied: every vendor capacity figure is the full-duplex aggregate of the declared census - 128 = 24x2 + 4x20, 140 = 20x2 + 4x5 + 4x20, 176 = 48x2 + 4x20, 188 = 44x2 + 4x5 + 4x20 - and each forwarding rate follows the same ports (1.488 Mpps per gigabit, 14.88 per 10G, 2.976 per 2.5G).

PoE budget noted, not smoothed over: 802.3af on all 24 PoE ports of the 28MP is 369.6 W and just fits inside the 370 W budget by 0.4 W; on the 48-port 52MP it does not fit, so roughly half the ports can run at 802.3af and only twelve at 802.3at 30 W. The 740 W figure requires the DPS-700 RPS, which the datasheet footnote restricts to A2/B1 hardware, so on these A1 units it is an upgrade path and the spec says so.

Not invented: the datasheet publishes the census and the media but no front-panel port index, so ports are named by media (ge / mg / xgt / sfp+) rather than by a number the document does not state. The RJ-45 console port is modelled as a console interface because the datasheet lists it under "Console Port - RJ-45 port for out-of-band CLI management" on all four models.

Gates: node scripts/syntax-check.js 350 files OK; node scripts/audit-port-types.js - no port contradicts its declared type; node scripts/audit-devices.js - no hard defects; full suite node scripts/run-tests.js 280 suites / 9,970 assertions / 0 failed; importer dry run on a fixture: 4 added, 0 rejected; docs/DEVICE_REGISTRY.md regenerated (2,210 -> 2,214 models, L3 switch 206 -> 210).

Specs: devices/dlink/dgs-1520-{28,28mp,52,52mp}.json, research input research/incoming/devices-dlink-dgs-1520.json.

Adds the four members of the D-Link **DGS-1520** (hardware Rev A1) Layer 3 stackable smart managed series. None of them were in the catalogue. | model | ports | PoE | capacity | forwarding | |---|---|---|---|---| | DGS-1520-28 | 24x 1G RJ45 + 2x 10GBASE-T + 2x 10G SFP+ | none | 128 Gbps | 95.24 Mpps | | DGS-1520-28MP | 20x 1G PoE + 4x 2.5GBASE-T PoE + 2x 10GBASE-T + 2x 10G SFP+ | 802.3af/at, 370 W (740 W with DPS-700) | 140 Gbps | 104.16 Mpps | | DGS-1520-52 | 48x 1G RJ45 + 2x 10GBASE-T + 2x 10G SFP+ | none | 176 Gbps | 130.95 Mpps | | DGS-1520-52MP | 44x 1G PoE + 4x 2.5GBASE-T PoE + 2x 10GBASE-T + 2x 10G SFP+ | 802.3af/at, 370 W (740 W with DPS-700) | 188 Gbps | 139.88 Mpps | Source for every field: D-Link DGS-1520 Series A1 datasheet, https://www.dlink.com/us/en/-/media/business_products/dgs/dgs-1520/datasheet/dgs1520seriesa1datasheetv104ww.pdf (specification table + ordering information). Recorded per spec in `sourceUrl`, in `poe.sourceUrl` and in `fabric.note`. **Why the MP models matter:** they put four 2.5GBASE-T PoE ports on the same PoE bank as the gigabit ports - one budget, one standard row, not a separate zone - so a Wi-Fi 6 AP can sit above gigabit without a 10G run. Both MP models also carry 10GBASE-T copper *and* 10G SFP+ cages, which is a port-shape the catalogue had no example of before. **Arithmetic checked, not copied:** every vendor capacity figure is the full-duplex aggregate of the declared census - 128 = 24x2 + 4x20, 140 = 20x2 + 4x5 + 4x20, 176 = 48x2 + 4x20, 188 = 44x2 + 4x5 + 4x20 - and each forwarding rate follows the same ports (1.488 Mpps per gigabit, 14.88 per 10G, 2.976 per 2.5G). **PoE budget noted, not smoothed over:** 802.3af on all 24 PoE ports of the 28MP is 369.6 W and just fits inside the 370 W budget by 0.4 W; on the 48-port 52MP it does not fit, so roughly half the ports can run at 802.3af and only twelve at 802.3at 30 W. The 740 W figure requires the DPS-700 RPS, which the datasheet footnote restricts to A2/B1 hardware, so on these A1 units it is an upgrade path and the spec says so. **Not invented:** the datasheet publishes the census and the media but no front-panel port index, so ports are named by media (`ge` / `mg` / `xgt` / `sfp+`) rather than by a number the document does not state. The RJ-45 console port is modelled as a console interface because the datasheet lists it under "Console Port - RJ-45 port for out-of-band CLI management" on all four models. **Gates:** `node scripts/syntax-check.js` 350 files OK; `node scripts/audit-port-types.js` - no port contradicts its declared type; `node scripts/audit-devices.js` - no hard defects; full suite `node scripts/run-tests.js` 280 suites / 9,970 assertions / 0 failed; importer dry run on a fixture: 4 added, 0 rejected; `docs/DEVICE_REGISTRY.md` regenerated (2,210 -> 2,214 models, L3 switch 206 -> 210). Specs: `devices/dlink/dgs-1520-{28,28mp,52,52mp}.json`, research input `research/incoming/devices-dlink-dgs-1520.json`.
D-Link DGS-1520: four Layer 3 stackable switches, 10GBase-T beside SFP+ and 2.5G PoE
All checks were successful
CI / Classify the change (pull_request) Successful in 12s
PR rebase / Rebase onto main and arm auto-merge (pull_request) Successful in 17s
CI / Server smoke test (pull_request) Has been skipped
CI / Docker build (pull_request) Has been skipped
CI / Test (Node 18) (pull_request) Successful in 1m31s
CI / Test (Node 20) (pull_request) Successful in 1m31s
CI / Test (Node 22) (pull_request) Successful in 1m41s
769fbe910d
All four members of the DGS-1520 (A1) family, from the vendor datasheet. The MP models mix line rates on the PoE bank: 20x or 44x gigabit PoE plus 4x 2.5GBASE-T PoE, against a 370 W budget and 24 or 48 PoE ports. Switching capacity and forwarding rate check out against the census for all four (128/140/176/188 Gbps). The datasheet prints no front-panel port index, so ports are named by media rather than by an invented number.

Co-authored-by: Hermes Agent <jay@jayw.uk>
jaylouisw scheduled this pull request to auto merge when all checks succeed 2026-11-16 13:34:04 +00:00
Sign in to join this conversation.
No reviewers
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge!1667
No description provided.