[Device]: FS AC-1004 (Wi-Fi 6 WLAN controller) #769

Closed
opened 2026-11-08 06:20:21 +00:00 by jaylouisw · 1 comment
Owner

Vendor

FS

Exact model name

FS AC-1004 (Wi-Fi 6 WLAN controller)

Category

Other / not sure

Ports and interfaces

  • WLAN controller, manages up to 64 APs
  • 5 Gbps throughput, on-premises, AC virtualization

PoE budget (watts)

None unless stated in the port list above

Datasheet or product page URL

https://www.fs.com/uk/products/141375.html

What do you want to model with it?

Wireless LAN controller for small sites.

Capabilities

WLAN controller (CAPWAP AP management)

Before submitting

  • I searched the catalog and existing issues, and this model is not there yet.
  • The port list above comes from a datasheet, not from memory or another wiki.
### Vendor FS ### Exact model name FS AC-1004 (Wi-Fi 6 WLAN controller) ### Category Other / not sure ### Ports and interfaces - WLAN controller, manages up to 64 APs - 5 Gbps throughput, on-premises, AC virtualization ### PoE budget (watts) None unless stated in the port list above ### Datasheet or product page URL https://www.fs.com/uk/products/141375.html ### What do you want to model with it? Wireless LAN controller for small sites. ### Capabilities WLAN controller (CAPWAP AP management) ### Before submitting - [x] I searched the catalog and existing issues, and this model is not there yet. - [x] The port list above comes from a datasheet, not from memory or another wiki.
Author
Owner

Modelled - devices/fs/ac-1004.json, commit 07146f7 on fix/sfp-plus-connectors.

FS renders its product pages for the extractor after all - the earlier failures were the datasheet PDF URLs, not the pages. The service-port line is exact: "1x 10/100/1000BASE-T ports, 4x 10/100/1000BASE-T ports (PoE Support)" plus "Console Port: (1) RJ45".

So five copper ports, four of which can power an AP, and a console that is a console rather than a sixth Ethernet port. No poeOut and no poeBudget are declared: FS publishes neither a per-port wattage nor an aggregate figure for those four ports, and inventing 15.4 W apiece is the error this catalogue refuses (compare #527, where volts and amps were published and so were modelled). A lab should read the PoE side as capability until a figure exists.

It is a controller, not an AP: up to 64 Wi-Fi 6 APs and 1000 clients, no radio of its own, and it does forward (gateway and switch functions) - hence l2-forward/l3-forward/nat and no wireless.

All four FS controllers were answered from one page: the AC-1004 product page carries FS's own comparison table across the range, which is a port census for the whole family. Commit 07146f7 on fix/sfp-plus-connectors.

Modelled - `devices/fs/ac-1004.json`, commit `07146f7` on `fix/sfp-plus-connectors`. FS renders its product pages for the extractor after all - the earlier failures were the *datasheet PDF* URLs, not the pages. The service-port line is exact: *"**1x 10/100/1000BASE-T ports, 4x 10/100/1000BASE-T ports (PoE Support)**"* plus *"Console Port: (1) RJ45"*. So five copper ports, four of which can power an AP, and a console that is a console rather than a sixth Ethernet port. **No `poeOut` and no `poeBudget` are declared**: FS publishes neither a per-port wattage nor an aggregate figure for those four ports, and inventing 15.4 W apiece is the error this catalogue refuses (compare #527, where volts and amps *were* published and so were modelled). A lab should read the PoE side as capability until a figure exists. It is a **controller**, not an AP: up to 64 Wi-Fi 6 APs and 1000 clients, no radio of its own, and it does forward (gateway and switch functions) - hence `l2-forward`/`l3-forward`/`nat` and no `wireless`. All four FS controllers were answered from **one page**: the AC-1004 product page carries FS's own comparison table across the range, which is a port census for the whole family. Commit `07146f7` on `fix/sfp-plus-connectors`.
Sign in to join this conversation.
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge#769
No description provided.