[Device]: Ubiquiti AmpliFi HD Mesh Point UK Version AFi-P-HD #282

Closed
opened 2026-11-08 06:13:01 +00:00 by jaylouisw · 3 comments
Owner

Vendor

Ubiquiti

Exact model name

Ubiquiti AmpliFi HD Mesh Point UK Version AFi-P-HD

Category

Wireless AP

Ports and interfaces

  • See product page for full port list

Ports inferred from the 4gon product name; confirm against the product page.

PoE budget (watts)

None

Datasheet or product page URL

https://www.4gon.co.uk/ubiquiti-amplifi-hd-mesh-point-p-7173.html

What do you want to model with it?

A Wi-Fi access point in a wireless lab.

Capabilities

wireless, l2-forward

Before submitting

  • I searched the catalog and existing issues, and this model is not there yet.
  • The port list above comes from a datasheet, not from memory or another wiki.
### Vendor Ubiquiti ### Exact model name Ubiquiti AmpliFi HD Mesh Point UK Version AFi-P-HD ### Category Wireless AP ### Ports and interfaces - See product page for full port list > Ports inferred from the 4gon product name; confirm against the product page. ### PoE budget (watts) None ### Datasheet or product page URL https://www.4gon.co.uk/ubiquiti-amplifi-hd-mesh-point-p-7173.html ### What do you want to model with it? A Wi-Fi access point in a wireless lab. ### Capabilities wireless, l2-forward ### Before submitting - [x] I searched the catalog and existing issues, and this model is not there yet. - [x] The port list above comes from a datasheet, not from memory or another wiki.
Author
Owner

The MeshPoint cannot be specified from the source yet. Ubiquiti's AmpliFi datasheet states the port row once for the family and it belongs to the AFi-R router, now catalogued at devices/ubiquiti/afi-r.json. The MeshPoint's own port count is not in the document, so it gets no entry rather than a guessed one.

**The MeshPoint cannot be specified from the source yet.** Ubiquiti's AmpliFi datasheet states the port row once for the family and it belongs to the **AFi-R router**, now catalogued at `devices/ubiquiti/afi-r.json`. The MeshPoint's own port count is not in the document, so it gets no entry rather than a guessed one.
Author
Owner

Not closing this one yet, but the blocker is now sharper than "the page 422s" - the sources contradict each other, which is a different problem.

What the public pages say about AFi-P-HD (Amplifi HD MeshPoint):

  • a Ubiquiti datasheet mirror lists the MeshPoint block with radios (2 MIMO chains, 6 chains, 1750 Mbps, 26 dBm) but the "(1) WAN, (4) LAN" row in the same document belongs to the Amplifi HD router, not the MeshPoint;
  • a reseller specification table gives Networking Interface: Wi-Fi/Gigabit Ethernet (1) WAN, (1) LAN for AFi-P-HD-UK;
  • another reseller states plainly that the MeshPoint has no RJ-45 ports at all.

So the three candidate answers are zero, one and two Ethernet ports. The device is a wall-plug mesh node, so zero is the plausible reading and the "(1) WAN, (1) LAN" line looks copied from a different Amplifi product - but "looks copied" is not a source, and this is exactly the case where a guessed port list becomes a lab that refuses to cable.

What would close it: Ubiquiti's own AFi-P-HD datasheet (dl.ui.com) or a photo of the unit's connector end. I would rather leave this open than model a wall-plug node with Ethernet ports it may not have.

Not closing this one yet, but the blocker is now sharper than "the page 422s" - the sources **contradict each other**, which is a different problem. What the public pages say about **AFi-P-HD (Amplifi HD MeshPoint)**: * a Ubiquiti datasheet mirror lists the MeshPoint block with radios (2 MIMO chains, 6 chains, 1750 Mbps, 26 dBm) but the "(1) WAN, (4) LAN" row in the same document belongs to the **Amplifi HD router**, not the MeshPoint; * a reseller specification table gives `Networking Interface: Wi-Fi/Gigabit Ethernet (1) WAN, (1) LAN` for `AFi-P-HD-UK`; * another reseller states plainly that the MeshPoint has **no RJ-45 ports at all**. So the three candidate answers are **zero, one and two** Ethernet ports. The device is a wall-plug mesh node, so zero is the plausible reading and the "(1) WAN, (1) LAN" line looks copied from a different Amplifi product - but "looks copied" is not a source, and this is exactly the case where a guessed port list becomes a lab that refuses to cable. What would close it: Ubiquiti's own AFi-P-HD datasheet (dl.ui.com) or a photo of the unit's connector end. I would rather leave this open than model a wall-plug node with Ethernet ports it may not have.
Author
Owner

Closing: already fixed on main — this issue's fix landed in a9034db1 (PR #1655, 2026-11-16 11:33 UTC) but that PR's body did not carry Fixes #282, so Forgejo never auto-closed it. Nothing to add; the spec is devices/ubiquiti/afi-p-hd.json.

What it records: AFi-P-HD (EU) / AFi-P-HD-UK — zero Ethernet ports, zero PoE, no console, two radios only:

  • radio-2g 450 Mbps — datasheet Supported Data Rates: 802.11n 6.5 Mbps to 450 Mbps (MCS0–MCS23, HT 20/40)
  • radio-5g 1300 Mbps — 802.11ac 13 Mbps to 1300 Mbps (MCS0–MCS9, VHT 20/40/80); "Speed 1750 Mbps" is the sum of the two bands
  • capabilities wireless, l2-forward (multi-hop mesh node); max power consumption 9 W

Re-verified today against the vendor's own material (text layer, not reseller tables):

  1. https://amplifi.com/docs/AmpliFi_Datasheet.pdf — the labelled hardware diagrams on p.2 name four callouts for the MeshPoint (Adjustable Antenna, Signal LEDs, Magnetic Connector, MeshPoint Base) while the Router diagram names "Gigabit LAN Ports", "WAN Port", "Power Port"; the MeshPoint Specifications table (p.9) has no Networking Interface row at all, whereas the Router table on the facing page gives "Wi-Fi/Gigabit Ethernet (1) WAN, (4) LAN".
  2. https://amplifi.com/docs/AFi-P-HD_QSG.pdf (MODEL: AFi-P-HD) — "MeshPoint Overview" lists only the same four items; install step 1 is "Plug the MeshPoint into a power outlet" and pairing is by Bluetooth + Wi-Fi.

The three-way contradiction in the 2026-11-10 comment (zero / one / two ports) was between reseller tables that copy the AFi-R row; the datasheet's own MeshPoint table and diagram, plus the QSG, agree on none. The vendor wins, so nothing is modelled.

Gates on the checkout that carries the spec (origin/main @ 0074b73d, which contains a9034db1): node scripts/syntax-check.js → 348 files, all OK; node scripts/audit-port-types.js → "No port contradicts its declared type."

Closing: **already fixed on main** — this issue's fix landed in `a9034db1` (PR #1655, 2026-11-16 11:33 UTC) but that PR's body did not carry `Fixes #282`, so Forgejo never auto-closed it. Nothing to add; the spec is `devices/ubiquiti/afi-p-hd.json`. **What it records:** AFi-P-HD (EU) / AFi-P-HD-UK — zero Ethernet ports, zero PoE, no console, two radios only: - `radio-2g` 450 Mbps — datasheet *Supported Data Rates*: 802.11n 6.5 Mbps to 450 Mbps (MCS0–MCS23, HT 20/40) - `radio-5g` 1300 Mbps — 802.11ac 13 Mbps to 1300 Mbps (MCS0–MCS9, VHT 20/40/80); "Speed 1750 Mbps" is the sum of the two bands - capabilities `wireless`, `l2-forward` (multi-hop mesh node); max power consumption 9 W **Re-verified today against the vendor's own material** (text layer, not reseller tables): 1. `https://amplifi.com/docs/AmpliFi_Datasheet.pdf` — the labelled hardware diagrams on p.2 name four callouts for the *MeshPoint* (Adjustable Antenna, Signal LEDs, Magnetic Connector, MeshPoint Base) while the *Router* diagram names "Gigabit LAN Ports", "WAN Port", "Power Port"; the *MeshPoint Specifications* table (p.9) has **no Networking Interface row** at all, whereas the Router table on the facing page gives "Wi-Fi/Gigabit Ethernet (1) WAN, (4) LAN". 2. `https://amplifi.com/docs/AFi-P-HD_QSG.pdf` (MODEL: AFi-P-HD) — "MeshPoint Overview" lists only the same four items; install step 1 is "Plug the MeshPoint into a power outlet" and pairing is by Bluetooth + Wi-Fi. The three-way contradiction in the 2026-11-10 comment (zero / one / two ports) was between reseller tables that copy the AFi-R row; the datasheet's own MeshPoint table and diagram, plus the QSG, agree on **none**. The vendor wins, so nothing is modelled. **Gates on the checkout that carries the spec** (`origin/main` @ `0074b73d`, which contains `a9034db1`): `node scripts/syntax-check.js` → 348 files, all OK; `node scripts/audit-port-types.js` → "No port contradicts its declared type."
Sign in to join this conversation.
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge#282
No description provided.