devices(ubiquiti): the 48-port Gen1 UniFi PoEs charged 1 W a socket #2425

Merged
jaylouisw merged 1 commit from catalogue/1121-1252 into main 2026-11-21 13:09:29 +00:00
Owner

Refs #130 (no closing keyword - the UDW-PRO request is still blocked on a vendor page that does not exist; this fixes the switches a Dream Wall lab puts underneath it).

US-48-500W and US-48-750W declared poeOut: true on all 48 copper ports. That is the bare direction bit: engine/media.js poeDraw() sums it as 1 W and the faceplate's num() prints nothing. Measured before: twenty 25.5 W AP-515s cabled to US-48-500W reported 20 W of draw against a 500 W budget, so pseDraw() could never raise E_POE_BUDGET and a full chassis of PoE+ APs looked free.

The vendor's numbers. https://dl.ui.com/qsg/US-48-500W_US-48-750W/US-48-500W_US-48-750W_EN.html (HTTP 200, 19,990 B, read 2026-11-21) covers both models (Model: US-48-500W, US-48-750W) and prints PoE Interfaces POE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-), Max. PoE+ Wattage per Port by PSE 34.2W, Voltage Range 802.3at Mode 50-57V, (48) 10/100/1000 Mbps RJ45 Ethernet Ports, (2) 1/10 Gbps SFP+ Ethernet Ports, (2) 1 Gbps SFP Ethernet Ports and (1) RJ45 Serial Port Out-of-Band.

What changed. Every copper socket now declares poeOut: 34.2 with poeOutClass: "PoE+", and 802.3af joins 802.3at because the same row prints IEEE 802.3af/at. The census also gained the two 10G SFP+ cages the spec never had (sfp+1/sfp+2, 10G/1G - the model carried 50 jacks for 52 physical) and the RJ45 serial console the guide's Management row names. 53 jacks for 53 physical on both models.

Measured after. AP-515 (25.5 W): US-48-500W accepts 14 and refuses the 15th - 15 powered ports draw 513 W of a 500 W budget; US-48-750W accepts 21 and refuses the 22nd - 752.4 W of a 750 W budget. A 30 W 802.3at device cables to eth47 on both without a refusal.

Not invented. Budgets stay 500 W / 750 W, each from the tech-spec Total PoE Availability row (not the model name, not the PSU). The QSG's LED legend names 24V Passive PoE on ports 1-48, but neither surface prints a passive per-port wattage, so passive-poe is left undeclared rather than given a guessed ceiling.

Gates. syntax-check 532 files OK; audit-port-types 0 contradicting ports; audit-devices 2,352 models / 0 uncablable / 0 hard defects; audit-poe-budget 0 name-inferred budgets / 0 budget-without-PSE; hardware-invariants 26/26; new test/ubiquiti-us-48-poe-per-port-watts.test.js 48 checks; full scripts/run-tests.js 453 suites / 15,391 assertions, 0 failed. docs/CONNECTORS.md regenerated (29,769 -> 29,775 sockets), not hand-edited.

Left for the next pass. US-48 (the non-PoE sibling, same chassis) also carries only the two 1G SFP cages although its own tech-spec page prints 10G SFP+ 2, and udw.json's two SFP+ cages still carry no role - both need the vendor's panel numbering before they can be written.

Refs #130 (no closing keyword - the UDW-PRO request is still blocked on a vendor page that does not exist; this fixes the switches a Dream Wall lab puts underneath it). `US-48-500W` and `US-48-750W` declared `poeOut: true` on all 48 copper ports. That is the bare direction bit: `engine/media.js` `poeDraw()` sums it as **1 W** and the faceplate's `num()` prints nothing. Measured before: twenty 25.5 W AP-515s cabled to `US-48-500W` reported **20 W of draw against a 500 W budget**, so `pseDraw()` could never raise `E_POE_BUDGET` and a full chassis of PoE+ APs looked free. **The vendor's numbers.** `https://dl.ui.com/qsg/US-48-500W_US-48-750W/US-48-500W_US-48-750W_EN.html` (HTTP 200, 19,990 B, read 2026-11-21) covers both models (`Model: US-48-500W, US-48-750W`) and prints `PoE Interfaces POE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-)`, `Max. PoE+ Wattage per Port by PSE 34.2W`, `Voltage Range 802.3at Mode 50-57V`, `(48) 10/100/1000 Mbps RJ45 Ethernet Ports`, `(2) 1/10 Gbps SFP+ Ethernet Ports`, `(2) 1 Gbps SFP Ethernet Ports` and `(1) RJ45 Serial Port Out-of-Band`. **What changed.** Every copper socket now declares `poeOut: 34.2` with `poeOutClass: "PoE+"`, and `802.3af` joins `802.3at` because the same row prints `IEEE 802.3af/at`. The census also gained the **two 10G SFP+ cages** the spec never had (`sfp+1`/`sfp+2`, 10G/1G - the model carried 50 jacks for 52 physical) and the **RJ45 serial console** the guide's Management row names. 53 jacks for 53 physical on both models. **Measured after.** AP-515 (25.5 W): `US-48-500W` accepts 14 and refuses the 15th - `15 powered ports draw 513 W of a 500 W budget`; `US-48-750W` accepts 21 and refuses the 22nd - `752.4 W of a 750 W budget`. A 30 W 802.3at device cables to `eth47` on both without a refusal. **Not invented.** Budgets stay 500 W / 750 W, each from the tech-spec `Total PoE Availability` row (not the model name, not the PSU). The QSG's LED legend names `24V Passive PoE` on ports 1-48, but neither surface prints a passive per-port wattage, so `passive-poe` is left undeclared rather than given a guessed ceiling. **Gates.** `syntax-check` 532 files OK; `audit-port-types` 0 contradicting ports; `audit-devices` 2,352 models / 0 uncablable / 0 hard defects; `audit-poe-budget` 0 name-inferred budgets / 0 budget-without-PSE; `hardware-invariants` 26/26; new `test/ubiquiti-us-48-poe-per-port-watts.test.js` 48 checks; full `scripts/run-tests.js` 453 suites / 15,391 assertions, 0 failed. `docs/CONNECTORS.md` regenerated (29,769 -> 29,775 sockets), not hand-edited. **Left for the next pass.** `US-48` (the non-PoE sibling, same chassis) also carries only the two 1G SFP cages although its own tech-spec page prints `10G SFP+ 2`, and `udw.json`'s two SFP+ cages still carry no `role` - both need the vendor's panel numbering before they can be written.
devices(ubiquiti): the 48-port Gen1 UniFi PoEs charged 1 W a socket (refs #130)
All checks were successful
CI / Server smoke and Docker build (pull_request) Successful in 46s
PR rebase / Rebase onto main and arm auto-merge (pull_request) Successful in 7s
CI / Test (Node 22) (pull_request) Successful in 1m3s
CI / Test (Node 18) (pull_request) Successful in 1m4s
CI / Test (Node 20) (pull_request) Successful in 1m4s
CI / Arm auto-merge (pull_request) Successful in 3s
a18c0a482a
forgejo-actions scheduled this pull request to auto merge when all checks succeed 2026-11-21 13:00:54 +00:00
jaylouisw deleted branch catalogue/1121-1252 2026-11-21 13:09:30 +00:00
Sign in to join this conversation.
No reviewers
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge!2425
No description provided.