devices(teltonika): the RUT951 PoE+ had no PoE budget and a Cat 6 link on a Cat 4 radio #2238

Merged
jaylouisw merged 1 commit from catalogue/1120-0122 into main 2026-11-20 01:37:43 +00:00
Owner

Refs #130 only - this PR does not answer the UDW-PRO request, which stays open on the blocker recorded there. It repairs the cellular-router path that request's lab needs.

What was wrong. devices/teltonika/rut951-poe.json - the RUT951 PoE+, a cellular router with NAT/DHCP/VPN - declared three PSE ports (wan1, lan2, lan3, each poeOut: true, class PoE+) and no poe.budgetW. The loader therefore fell back to the model name, found no wattage in RUT951-POE+, and set the budget to 0 W with poeBudgetSource: 'name'. computePoe() skips a device whose budget is falsy, so the box reported:

Teltonika RUT951 PoE+-d1>show power inline
Interface  Admin  Supplied
wan1       auto   not measured
lan2       auto   not measured
lan3       auto   not measured
budget not modelled on RUT: the ports are reported, the power they could supply is not

An AP cabled to lan2 got nothing, on a router whose own datasheet prints a 90 W budget - the same defect class as #2235 (USW-Pro-XG-48-PoE) and #2175 (UXG-Fiber).

Vendor rows (RUT951 PoE+ datasheet v1.06, 2026-02-10, 15 pp, text layer):

row vendor text
POE OUT ports Port 2 - 4 (LAN2, LAN3, WAN)
POE OUT standards IEEE 802.3af (PoE, Type 1) and IEEE 802.3at (PoE+, Type 2) compliant PSE ports
per-port PoE Max Power per Port (at PSE) 30 W Max
budget PoE Power Budget (at PSE) 90 W
POE IN Port 1 (LAN1), af/at compliant PD port
mobile module 4G LTE Cat 4 up to 150 DL/50 UL Mbps

Changes.

  • poe.budgetW: 90 (source URL recorded), so show power inline now allocates.
  • wwan1 300M -> 150M. A Cat 4 radio cannot reach 300 Mbps; 300M is this family's Cat 6 figure (RUT260, RUT360, RUTX11). The vendor prints 150 DL/50 UL, the same reading #2160 applied to the UMR rows.
  • sourceUrl pointed at /product/rut951/, which redirects to the non-PoE RUT951 page. Now /products/routers/rut951-poe.
  • Description said "one PD in and two PSE out" beside three declared PSE ports; now says three, and names them.

The 90 W is conditional, and the note says so. The datasheet's power-source table: PoE+ (802.3at Type 2) input -> limited PoE output - up to 15 W total (1 port IEEE 802.3af Type 1); 802.3af input or DC below 44 V -> No PoE output available; DC >44 V and >=100 W -> Full PoE+ operation - up to 90 W total (3 ports IEEE 802.3at Type 2). The engine holds one static budget, so the published ceiling is recorded and the conditions live in poe.note/notes, the treatment the AT-X530DP supply-dependent budgets already use. A lab on a sub-44 V supply gets 0 W in the field and 90 W in the model - stated, not hidden.

After:

Teltonika RUT951 PoE+-d1>show power inline
Available:90.0(w) Used:13.0(w) Remaining:77.0(w)
Interface  Admin  Oper       Draw     Powered device
lan2       auto   on         12.95 W  AP
2 ports with nothing plugged in: wan1, lan3

Sources: https://www.teltonika-networks.com/products/routers/rut951-poe (200, 3,082,884 B - Total power budget of 90W, four PoE+ Ethernet ports); https://solwise.co.uk/downloads/files/Datasheet_RUT951%20PoE+_1.06_19-02-2026.pdf (200, application/pdf, 3,875,741 B, 15 pp - every port and power row above). Teltonika hosts no stable public PDF path for this model (/files/datasheets/... answers its 404 page), so the distributor mirror of the vendor datasheet is cited by checksummed size and page count.

Gates: syntax-check 474 files OK; audit-port-types no contradictions; audit-poe-budget silent rows 99 -> 98 (and prose-but-unmodelled 23 -> 22); hardware-invariants 26 passed; poe 21 passed; run-tests 394 suites / 13,203 assertions, 0 failed. DEVICE_REGISTRY.md regenerated, unchanged.

Refs #130 only - this PR does not answer the UDW-PRO request, which stays open on the blocker recorded there. It repairs the cellular-router path that request's lab needs. **What was wrong.** `devices/teltonika/rut951-poe.json` - the RUT951 PoE+, a cellular router with NAT/DHCP/VPN - declared three PSE ports (`wan1`, `lan2`, `lan3`, each `poeOut: true`, class `PoE+`) and no `poe.budgetW`. The loader therefore fell back to the model name, found no wattage in `RUT951-POE+`, and set the budget to 0 W with `poeBudgetSource: 'name'`. `computePoe()` skips a device whose budget is falsy, so the box reported: ``` Teltonika RUT951 PoE+-d1>show power inline Interface Admin Supplied wan1 auto not measured lan2 auto not measured lan3 auto not measured budget not modelled on RUT: the ports are reported, the power they could supply is not ``` An AP cabled to `lan2` got nothing, on a router whose own datasheet prints a 90 W budget - the same defect class as #2235 (USW-Pro-XG-48-PoE) and #2175 (UXG-Fiber). **Vendor rows (RUT951 PoE+ datasheet v1.06, 2026-02-10, 15 pp, text layer):** | row | vendor text | |---|---| | POE OUT ports | `Port 2 - 4 (LAN2, LAN3, WAN)` | | POE OUT standards | `IEEE 802.3af (PoE, Type 1) and IEEE 802.3at (PoE+, Type 2) compliant PSE ports` | | per-port | `PoE Max Power per Port (at PSE) 30 W Max` | | budget | `PoE Power Budget (at PSE) 90 W` | | POE IN | `Port 1 (LAN1)`, af/at compliant PD port | | mobile module | `4G LTE Cat 4 up to 150 DL/50 UL Mbps` | **Changes.** - `poe.budgetW: 90` (source URL recorded), so `show power inline` now allocates. - `wwan1` `300M` -> `150M`. A Cat 4 radio cannot reach 300 Mbps; 300M is this family's Cat 6 figure (RUT260, RUT360, RUTX11). The vendor prints 150 DL/50 UL, the same reading #2160 applied to the UMR rows. - `sourceUrl` pointed at `/product/rut951/`, which redirects to the **non-PoE** RUT951 page. Now `/products/routers/rut951-poe`. - Description said "one PD in and two PSE out" beside three declared PSE ports; now says three, and names them. **The 90 W is conditional, and the note says so.** The datasheet's power-source table: PoE+ (802.3at Type 2) input -> `limited PoE output - up to 15 W total (1 port IEEE 802.3af Type 1)`; 802.3af input or DC below 44 V -> `No PoE output available`; DC >44 V and >=100 W -> `Full PoE+ operation - up to 90 W total (3 ports IEEE 802.3at Type 2)`. The engine holds one static budget, so the published ceiling is recorded and the conditions live in `poe.note`/`notes`, the treatment the AT-X530DP supply-dependent budgets already use. A lab on a sub-44 V supply gets 0 W in the field and 90 W in the model - stated, not hidden. **After:** ``` Teltonika RUT951 PoE+-d1>show power inline Available:90.0(w) Used:13.0(w) Remaining:77.0(w) Interface Admin Oper Draw Powered device lan2 auto on 12.95 W AP 2 ports with nothing plugged in: wan1, lan3 ``` **Sources:** https://www.teltonika-networks.com/products/routers/rut951-poe (200, 3,082,884 B - `Total power budget of 90W`, `four PoE+ Ethernet ports`); https://solwise.co.uk/downloads/files/Datasheet_RUT951%20PoE+_1.06_19-02-2026.pdf (200, application/pdf, 3,875,741 B, 15 pp - every port and power row above). Teltonika hosts no stable public PDF path for this model (`/files/datasheets/...` answers its 404 page), so the distributor mirror of the vendor datasheet is cited by checksummed size and page count. **Gates:** `syntax-check` 474 files OK; `audit-port-types` no contradictions; `audit-poe-budget` silent rows 99 -> 98 (and prose-but-unmodelled 23 -> 22); `hardware-invariants` 26 passed; `poe` 21 passed; `run-tests` 394 suites / 13,203 assertions, 0 failed. `DEVICE_REGISTRY.md` regenerated, unchanged.
devices(teltonika): the RUT951 PoE+ had no budget and a Cat 6 link on a Cat 4 radio (refs #130)
All checks were successful
CI / Classify the change (pull_request) Successful in 12s
PR rebase / Rebase onto main and arm auto-merge (pull_request) Successful in 12s
CI / Server smoke and Docker build (pull_request) Has been skipped
CI / Test (Node 20) (pull_request) Successful in 56s
CI / Test (Node 22) (pull_request) Successful in 57s
CI / Test (Node 18) (pull_request) Successful in 1m1s
CI / Arm auto-merge (pull_request) Successful in 4s
4a816facd2
forgejo-actions scheduled this pull request to auto merge when all checks succeed 2026-11-20 01:32:48 +00:00
jaylouisw deleted branch catalogue/1120-0122 2026-11-20 01:37:46 +00:00
Sign in to join this conversation.
No reviewers
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge!2238
No description provided.