TP-Link TL-SG10xxP: four unmanaged PoE desktop switches (65/64/153/40 W budgets) #1645

Merged
jaylouisw merged 3 commits from catalogue/1116-0925 into main 2026-11-16 09:40:44 +00:00
Owner

What

Four TP-Link unmanaged PoE desktop switches, spec-sourced:

model ports PoE+ ports budget switching capacity MAC
TL-SG1005P 5x 1G RJ45 4 (af/at, 30 W) 65 W 10 Gbps 2K
TL-SG1008P 8x 1G RJ45 4 (af/at, 30 W) 64 W 16 Gbps 4K
TL-SG1008MP 8x 1G RJ45 8 (af/at, 30 W) 153 W 16 Gbps 4K
TL-SG1005LP 5x 1G RJ45 4 (af/at, 30 W) 40 W 10 Gbps 2K

All four are unmanaged, so no cli or http-server capability is claimed. PoE is declared per port as a wattage (30 W) against a poe.budgetW, so the connect-time budget check does the work: five 30 W APs fit on the 1008MP (153 W), one fits on the 1005LP (40 W), two on the 1005P and the 1008P.

Addresses #1512. The nearest existing entry was tl-sg105, the non-PoE five-port model, so an install whose cameras are powered by a TL-SG1005P could not be modelled at all.

Datasheet beats catalogue: two revision discrepancies

  1. TL-SG1005P V1 vs V2. #1512 quotes the V1 page: 802.3af only, 15.4 W per port, 56 W budget. The current V2/V6 datasheet is 802.3af/at, 30 W per port, 65 W budget. The entry follows the current revision; the V1 figures are written into notes and into this PR rather than silently averaged. The one case where the entry overstates hardware is a lab built from a V1 unit, which can power 27 W less than modelled.
  2. TL-SG1008MP V1 vs current. V1 published 126 W; the current page and datasheet publish 153 W. The entry follows 153 W.

Unresolved on the vendor side and therefore not claimed: the TL-SG1008MP product pages say fanless while its datasheet lists one fan, and the TL-SG1005P/1005LP pages quote a 16 KB jumbo frame against 9 KB in their datasheets. Jumbo frames use the datasheet figure (9 KB); no fan claim is made.

Sources (every field)

Validation

  • node scripts/syntax-check.js - 347 files, all OK
  • node scripts/audit-port-types.js - no port contradicts its declared type
  • node scripts/audit-devices.js - no hard defects
  • importer - 4 added, 0 rejected, 0 duplicates; the only warnings are 802.3af/802.3at, kept as declared descriptive tokens (the same class as the existing tl-sg1016pe entry)
  • npm test - 277 suites, 9,885 assertions, 0 failed
  • targeted probe - 29/29: port counts, PSE port counts, budgets, fabric ratio 0.5, and the budget refusing a second 30 W AP on the 1005LP (E_POE_BUDGET) and a sixth on the 1008MP
  • node scripts/regen-registry-doc.js plus the doc counts in README, CONNECTORS and the wiki Home updated: 2,196 models, 24,761 sockets, 868 port shapes

Anything unverifiable

  • Whether a given TL-SG1005P in the field is V1 or V2: the datasheets differ by 25 W of budget and by whether 802.3at exists at all. One catalogue entry cannot say both, so it follows the revision TP-Link currently publishes.
  • The TL-SG1008MP fan count (pages say fanless, datasheet says one fan).
## What Four TP-Link unmanaged PoE desktop switches, spec-sourced: | model | ports | PoE+ ports | budget | switching capacity | MAC | | --- | --- | --- | --- | --- | --- | | TL-SG1005P | 5x 1G RJ45 | 4 (af/at, 30 W) | 65 W | 10 Gbps | 2K | | TL-SG1008P | 8x 1G RJ45 | 4 (af/at, 30 W) | 64 W | 16 Gbps | 4K | | TL-SG1008MP | 8x 1G RJ45 | 8 (af/at, 30 W) | 153 W | 16 Gbps | 4K | | TL-SG1005LP | 5x 1G RJ45 | 4 (af/at, 30 W) | 40 W | 10 Gbps | 2K | All four are unmanaged, so no `cli` or `http-server` capability is claimed. PoE is declared per port as a wattage (30 W) against a `poe.budgetW`, so the connect-time budget check does the work: five 30 W APs fit on the 1008MP (153 W), one fits on the 1005LP (40 W), two on the 1005P and the 1008P. Addresses #1512. The nearest existing entry was `tl-sg105`, the non-PoE five-port model, so an install whose cameras are powered by a TL-SG1005P could not be modelled at all. ## Datasheet beats catalogue: two revision discrepancies 1. **TL-SG1005P V1 vs V2.** #1512 quotes the V1 page: 802.3af only, 15.4 W per port, 56 W budget. The current V2/V6 datasheet is 802.3af/at, 30 W per port, 65 W budget. The entry follows the current revision; the V1 figures are written into `notes` and into this PR rather than silently averaged. The one case where the entry overstates hardware is a lab built from a V1 unit, which can power 27 W less than modelled. 2. **TL-SG1008MP V1 vs current.** V1 published 126 W; the current page and datasheet publish 153 W. The entry follows 153 W. Unresolved on the vendor side and therefore not claimed: the TL-SG1008MP product pages say fanless while its datasheet lists one fan, and the TL-SG1005P/1005LP pages quote a 16 KB jumbo frame against 9 KB in their datasheets. Jumbo frames use the datasheet figure (9 KB); no fan claim is made. ## Sources (every field) - TL-SG1005P: https://static.tp-link.com/upload/product-overview/2026/202609/20260924/TL-SG1005P(UN)6.0_datasheet.pdf, cross-checked against https://www.tp-link.com/us/business-networking/unmanaged-switch/tl-sg1005p/v2/ - TL-SG1008P: https://www.tp-link.com/us/business-networking/unmanaged-switch/tl-sg1008p/ and https://www.tp-link.com/uk/business-networking/unmanaged-switch/tl-sg1008p/ - TL-SG1008MP: https://www.tp-link.com/uk/business-networking/unmanaged-switch/tl-sg1008mp/ and https://www.tp-link.com/us/business-networking/unmanaged-switch/tl-sg1008mp/ - TL-SG1005LP: https://static.tp-link.com/upload/product-overview/2026/202609/20260924/TL-SG1005LP(UN)4.0_datasheet.pdf, cross-checked against https://www.tp-link.com/uk/business-networking/poe-switch/tl-sg1005lp/ ## Validation - `node scripts/syntax-check.js` - 347 files, all OK - `node scripts/audit-port-types.js` - no port contradicts its declared type - `node scripts/audit-devices.js` - no hard defects - importer - 4 added, 0 rejected, 0 duplicates; the only warnings are `802.3af`/`802.3at`, kept as declared descriptive tokens (the same class as the existing `tl-sg1016pe` entry) - `npm test` - 277 suites, 9,885 assertions, 0 failed - targeted probe - 29/29: port counts, PSE port counts, budgets, fabric ratio 0.5, and the budget refusing a second 30 W AP on the 1005LP (E_POE_BUDGET) and a sixth on the 1008MP - `node scripts/regen-registry-doc.js` plus the doc counts in README, CONNECTORS and the wiki Home updated: 2,196 models, 24,761 sockets, 868 port shapes ## Anything unverifiable - Whether a given TL-SG1005P in the field is V1 or V2: the datasheets differ by 25 W of budget and by whether 802.3at exists at all. One catalogue entry cannot say both, so it follows the revision TP-Link currently publishes. - The TL-SG1008MP fan count (pages say fanless, datasheet says one fan).
TP-Link TL-SG10xxP: four unmanaged PoE desktop switches, a 40 W budget on a 30 W port
All checks were successful
CI / Classify the change (pull_request) Successful in 16s
PR rebase / Rebase onto main and arm auto-merge (pull_request) Successful in 20s
CI / Server smoke test (pull_request) Successful in 21s
CI / Docker build (pull_request) Successful in 47s
CI / Test (Node 20) (pull_request) Successful in 1m24s
CI / Test (Node 18) (pull_request) Successful in 1m34s
CI / Test (Node 22) (pull_request) Successful in 1m43s
1ac28a082b
The catalogue had the managed PoE boxes (tl-sg1016pe, tl-sg1210mpe, tl-sg2210mp,
tl-sg2428p) and the non-PoE unmanaged ones (tl-sg105, tl-sg1024d), but none of the
unmanaged PoE switches that small installs actually run cameras from. tl-sg105 is
the five-port model with no PoE anywhere, so a lab of an install whose cameras are
powered by a TL-SG1005P refuses a cable the hardware accepts (issue #1512).

Adds TL-SG1005P, TL-SG1008P, TL-SG1008MP and TL-SG1005LP: 5/8/8/5 gigabit RJ45
with PoE+ on 4/4/8/4 ports, budgets of 65/64/153/40 W, switching capacity
10/16/16/10 Gbps, MAC tables 2K/4K/4K/2K. Unmanaged, so no cli or http-server
capability is claimed. PoE is numeric per port (30 W PoE+) against a budget the
connect-time check enforces, which is why five 30 W APs fit on the 1008MP and one
fits on the 1005LP.

Two revision discrepancies are recorded rather than smoothed over: TL-SG1005P V1
is 802.3af only at 15.4 W per port on a 56 W budget, not the current af/at 30 W
on 65 W, and TL-SG1008MP V1 published 126 W before the current 153 W.
jaylouisw scheduled this pull request to auto merge when all checks succeed 2026-11-16 09:40:37 +00:00
jaylouisw force-pushed catalogue/1116-0925 from 1ac28a082b
All checks were successful
CI / Classify the change (pull_request) Successful in 16s
PR rebase / Rebase onto main and arm auto-merge (pull_request) Successful in 20s
CI / Server smoke test (pull_request) Successful in 21s
CI / Docker build (pull_request) Successful in 47s
CI / Test (Node 20) (pull_request) Successful in 1m24s
CI / Test (Node 18) (pull_request) Successful in 1m34s
CI / Test (Node 22) (pull_request) Successful in 1m43s
to 9d74cb69c1
All checks were successful
CI / Classify the change (pull_request) Successful in 12s
PR rebase / Rebase onto main and arm auto-merge (pull_request) Successful in 15s
CI / Test (Node 18) (pull_request) Has been skipped
CI / Test (Node 20) (pull_request) Has been skipped
CI / Test (Node 22) (pull_request) Has been skipped
CI / Server smoke test (pull_request) Has been skipped
CI / Docker build (pull_request) Has been skipped
2026-11-16 09:40:41 +00:00
Compare
Sign in to join this conversation.
No reviewers
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge!1645
No description provided.