Grandstream GWN7800: eight L2+ switches, PoE budgets the brochure rounds down, and 10G SFP+ uplinks it calls Gigabit #1613

Merged
jaylouisw merged 1 commit from catalogue/1116-0556 into main 2026-11-16 06:09:41 +00:00
Owner

The catalogue had five Grandstream boxes (two phones, two ATAs, an access point) and no switch at all. This adds the GWN7800 Layer 2+ managed switch family: 8 models, 8 specs.

What was added

model copper uplinks PoE budget switching capacity
GWN7801 8x 1G 2x 1G SFP - - 20 Gbps
GWN7801P 8x 1G 2x 1G SFP 802.3af/at, 30 W/port 130 W of a 150 W PSU 20 Gbps
GWN7802 16x 1G 4x 1G SFP - - 40 Gbps
GWN7802P 16x 1G 4x 1G SFP 802.3af/at, 30 W/port 240 W of a 270 W PSU 40 Gbps
GWN7803 24x 1G 4x 1G SFP - - 56 Gbps
GWN7803P 24x 1G 4x 1G SFP 802.3af/at, 30 W/port 370 W of a 400 W PSU 56 Gbps
GWN7806 48x 1G 6x 10G SFP+ - - 216 Gbps
GWN7806P 48x 1G 6x 10G SFP+ 802.3af/at, 30 W/port 400 W of a 470 W PSU 216 Gbps

All eight carry an RJ45 console at 115200 8-N-1 into the CLI, web UI plus CLI management, 802.1Q VLANs, LACP and STP. The GWN7806 pair adds 32 IPv4 / 32 IPv6 static routes and a DHCP server.

Sources (every field carries one)

Discrepancies - the datasheet wins in each case

  1. GWN7801P PoE budget. The 23Q1 eBrochure and the product-page comparison chart say 120 W; the model datasheet and the GWN780x specification page both say 130 W from a 150 W supply. Modelled: 130 W.
  2. GWN7803P PoE budget. The GWN780x specification page and the series presentation say 360 W; the model datasheet says 370 W from a 400 W supply. Modelled: 370 W.
  3. GWN7806 forwarding rate / aggregation groups. Specification page: 160.702 Mpps and 27 link-aggregation groups. Datasheet: 160.704 Mpps and 32 groups. Modelled from the datasheet.
  4. GWN7806 uplinks. The GWN7800 series eBrochure calls them "6 Gigabit SFP ports"; the model datasheet, the product page and the GWN7810 comparison all call them 6x 10G SFP+. Modelled as 10G SFP+ (216 Gbps switching capacity only adds up with 10G uplinks).

Deliberately not claimed

  • No 802.3bt anywhere: this series is IEEE 802.3af/at only, so the 30 W port limit is declared and nothing more.
  • No l3-forward on any model. The GWN7801/7802/7803 SKUs list no static routing at all; the GWN7806 pair lists 32+32 static routes and a DHCP server, which is declared as dhcp-server while the category stays switch - no dynamic routing protocol appears in the datasheet.
  • SFP+ cages on the GWN7806 are declared 10G-only (speedCaps: [10000]). The datasheet lists 10G modules and DAC cables only; nothing documents a 1G SFP in those cages, so none is invented.
  • Per-model power draw, PoE class breakdown and thermal figures are not modelled at all; the datasheets do not publish idle/max consumption per SKU.

Validation

  • node scripts/import-devices.js (dry run, then --apply against a staging PF_INCOMING): 8 added, 0 rejected, 0 duplicates. Four specs keep 802.3af / 802.3at as descriptive tokens the engine does not implement, reported by the importer as warnings and kept as declared.
  • node scripts/syntax-check.js: 337 files, all OK.
  • node scripts/audit-port-types.js: 2,136 models, 0 offending devices, 0 offending ports, exit 0.
  • node test/hardware-invariants.test.js: 26 passed, 0 failed.
  • node test/spec-vs-description.test.js: 3 passed, 0 failed.
  • node test/doc-catalog-counts.test.js: 24 passed. node scripts/regen-registry-doc.js --check: current at 2,136 models / 252 vendors (switch 333 -> 341).
  • node test/importer-roundtrip.test.js: 26 passed. node test/topology-roundtrip.test.js: 35 passed. node scripts/check-control-bytes.js: clean.
The catalogue had five Grandstream boxes (two phones, two ATAs, an access point) and no switch at all. This adds the GWN7800 Layer 2+ managed switch family: **8 models, 8 specs**. ## What was added | model | copper | uplinks | PoE | budget | switching capacity | |---|---|---|---|---|---| | GWN7801 | 8x 1G | 2x 1G SFP | - | - | 20 Gbps | | GWN7801P | 8x 1G | 2x 1G SFP | 802.3af/at, 30 W/port | 130 W of a 150 W PSU | 20 Gbps | | GWN7802 | 16x 1G | 4x 1G SFP | - | - | 40 Gbps | | GWN7802P | 16x 1G | 4x 1G SFP | 802.3af/at, 30 W/port | 240 W of a 270 W PSU | 40 Gbps | | GWN7803 | 24x 1G | 4x 1G SFP | - | - | 56 Gbps | | GWN7803P | 24x 1G | 4x 1G SFP | 802.3af/at, 30 W/port | 370 W of a 400 W PSU | 56 Gbps | | GWN7806 | 48x 1G | 6x 10G SFP+ | - | - | 216 Gbps | | GWN7806P | 48x 1G | 6x 10G SFP+ | 802.3af/at, 30 W/port | 400 W of a 470 W PSU | 216 Gbps | All eight carry an RJ45 console at 115200 8-N-1 into the CLI, web UI plus CLI management, 802.1Q VLANs, LACP and STP. The GWN7806 pair adds 32 IPv4 / 32 IPv6 static routes and a DHCP server. ## Sources (every field carries one) - Model datasheet, GWN7801(P)/GWN7802(P)/GWN7803(P), English: https://www.grandstream.com/hubfs/Product_Documentation/GWN7800%20Series/Datasheet_GWN7801(P)_GWN7802(P)_GWN7803(P)_English.pdf - Model datasheet, GWN7806(P), English: https://www.grandstream.com/hubfs/Product_Documentation/GWN7806(P)/Datasheet_GWN7806_English.pdf - GWN780x technical specifications: https://documentation.grandstream.com/knowledge-base/gwn780x-series-technical-specifications/ - GWN780x Quick Installation Guide (console port, reset pinhole, front panel): https://documentation2.grandstream.com/knowledge-base/gwn780x-quick-installation-guide/ - Grandstream network switches FAQ (console baud 115200, console on managed models only): https://documentation.grandstream.com/knowledge-base/grandstream-network-switches-faq/ - GDMS Networking user guide (minimum / recommended firmware per model): https://documentation.grandstream.com/knowledge-base/gwn-management-platforms-user-guide/ ## Discrepancies - the datasheet wins in each case 1. **GWN7801P PoE budget.** The 23Q1 eBrochure and the product-page comparison chart say 120 W; the model datasheet and the GWN780x specification page both say 130 W from a 150 W supply. Modelled: **130 W**. 2. **GWN7803P PoE budget.** The GWN780x specification page and the series presentation say 360 W; the model datasheet says 370 W from a 400 W supply. Modelled: **370 W**. 3. **GWN7806 forwarding rate / aggregation groups.** Specification page: 160.702 Mpps and 27 link-aggregation groups. Datasheet: **160.704 Mpps** and **32** groups. Modelled from the datasheet. 4. **GWN7806 uplinks.** The GWN7800 series eBrochure calls them "6 Gigabit SFP ports"; the model datasheet, the product page and the GWN7810 comparison all call them **6x 10G SFP+**. Modelled as 10G SFP+ (216 Gbps switching capacity only adds up with 10G uplinks). ## Deliberately not claimed - No 802.3bt anywhere: this series is IEEE 802.3af/at only, so the 30 W port limit is declared and nothing more. - No `l3-forward` on any model. The GWN7801/7802/7803 SKUs list no static routing at all; the GWN7806 pair lists 32+32 static routes and a DHCP server, which is declared as `dhcp-server` while the category stays `switch` - no dynamic routing protocol appears in the datasheet. - SFP+ cages on the GWN7806 are declared 10G-only (`speedCaps: [10000]`). The datasheet lists 10G modules and DAC cables only; nothing documents a 1G SFP in those cages, so none is invented. - Per-model power draw, PoE class breakdown and thermal figures are not modelled at all; the datasheets do not publish idle/max consumption per SKU. ## Validation - `node scripts/import-devices.js` (dry run, then `--apply` against a staging `PF_INCOMING`): 8 added, 0 rejected, 0 duplicates. Four specs keep `802.3af` / `802.3at` as descriptive tokens the engine does not implement, reported by the importer as warnings and kept as declared. - `node scripts/syntax-check.js`: 337 files, all OK. - `node scripts/audit-port-types.js`: 2,136 models, **0 offending devices, 0 offending ports**, exit 0. - `node test/hardware-invariants.test.js`: 26 passed, 0 failed. - `node test/spec-vs-description.test.js`: 3 passed, 0 failed. - `node test/doc-catalog-counts.test.js`: 24 passed. `node scripts/regen-registry-doc.js --check`: current at 2,136 models / 252 vendors (switch 333 -> 341). - `node test/importer-roundtrip.test.js`: 26 passed. `node test/topology-roundtrip.test.js`: 35 passed. `node scripts/check-control-bytes.js`: clean.
Grandstream GWN7800: eight Layer 2+ switches, 30 W PoE ports behind budgets that bind, and six 10G SFP+ uplinks the brochure calls Gigabit
All checks were successful
CI / Classify the change (pull_request) Successful in 12s
PR rebase / Rebase onto main and arm auto-merge (pull_request) Successful in 16s
CI / Server smoke test (pull_request) Successful in 46s
CI / Docker build (pull_request) Successful in 21s
CI / Test (Node 20) (pull_request) Successful in 1m34s
CI / Test (Node 18) (pull_request) Successful in 1m44s
CI / Test (Node 22) (pull_request) Successful in 1m47s
2f0f005e45
The catalogue had five Grandstream boxes - two phones, two ATAs and an AP -
and no switch at all, so the cheapest managed PoE switch Grandstream sells
was missing entirely.

Gathered from the model datasheets (GWN7801(P)/GWN7802(P)/GWN7803(P) and
GWN7806(P)), the GWN780x technical-specification page, the Quick Installation
Guide and the network-switch FAQ:

- GWN7801 / GWN7802 / GWN7803: 8, 16 and 24 Gigabit ports with 2 or 4 1G SFP
  uplinks, 20/40/56 Gbps switching capacity, fanless.
- The P variants add 802.3af/at on every copper port at 30 W a port with
  130 W, 240 W and 370 W budgets from 150 W, 270 W and 400 W supplies - none
  of them 30 W x the port count.
- GWN7806(P): 48 Gigabit ports, six 10G SFP+ cages, 216 Gbps switching
  capacity, 160.704 Mpps, 400 W PoE budget on the P model, stacking to four.

Discrepancies recorded rather than smoothed over: the eBrochure and the
product-page comparison chart give the GWN7801P 120 W where the datasheet and
the specification page give 130 W; the specification page gives the GWN7803P
360 W where its datasheet gives 370 W; the specification page gives the
GWN7806 160.702 Mpps and 27 aggregation groups where the datasheet gives
160.704 Mpps and 32; and the eBrochure calls the six GWN7806 uplinks Gigabit
SFP where the datasheet and product page call them 10G SFP+.

2,128 -> 2,136 models, switch 333 -> 341.
jaylouisw scheduled this pull request to auto merge when all checks succeed 2026-11-16 06:09:23 +00:00
jaylouisw force-pushed catalogue/1116-0556 from 2f0f005e45
All checks were successful
CI / Classify the change (pull_request) Successful in 12s
PR rebase / Rebase onto main and arm auto-merge (pull_request) Successful in 16s
CI / Server smoke test (pull_request) Successful in 46s
CI / Docker build (pull_request) Successful in 21s
CI / Test (Node 20) (pull_request) Successful in 1m34s
CI / Test (Node 18) (pull_request) Successful in 1m44s
CI / Test (Node 22) (pull_request) Successful in 1m47s
to 170182c5d6
All checks were successful
CI / Classify the change (pull_request) Successful in 11s
PR rebase / Rebase onto main and arm auto-merge (pull_request) Successful in 12s
CI / Test (Node 18) (pull_request) Has been skipped
CI / Test (Node 20) (pull_request) Has been skipped
CI / Test (Node 22) (pull_request) Has been skipped
CI / Server smoke test (pull_request) Has been skipped
CI / Docker build (pull_request) Has been skipped
2026-11-16 06:09:25 +00:00
Compare
Sign in to join this conversation.
No reviewers
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge!1613
No description provided.