Add UISP Console and LiteBeam 5AC XR from the vendor figures #1069

Closed
jaylouisw wants to merge 2 commits from gh/1442 into main
Owner

Closes #1404. Closes #1403.

The rest of the Ubiquiti UFiber/wave stream is already in the catalogue (UF-OLT, UF-OLT-4, UF-NANO, UF-LOCO, UF-WIFI, UF-WIFI6, AF60-XG all resolve), so these are the two genuine gaps.

UISP-Console — 8 LAN GbE RJ45 + 1 LAN 1/10G SFP+, 1 WAN GbE RJ45 + 1 WAN 1/10G SFP+ from the vendor interface table. LAN ports in one bridge group and the WAN side carrying the wan role — without that split, a lab shows LAN-to-WAN traffic passing with no gateway. SFP+ cages declare speedCaps [1000,10000] so a 1G module is accepted at 1G rather than refused.

LBE-5AC-XR — 29 dBi parabolic, 5.15–5.85 GHz, 25 dBm, one GbE port. The radio is modelled at its 867 Mbps PHY rate, not the 450+ Mbps throughput claim — using the headline figure would have understated the hardware. The antenna refuses copper through both canMate and validateLink; two XRs still associate.

30 assertions.


Opened by @Jaylouisw on the GitHub mirror: https://github.com/Jaylouisw/packetforge/pull/1442
Branch gh/1442 carries their commits verbatim (head c8cf6597fe).
CI will run here. Merge here and the mirror carries the result back to GitHub.

Closes #1404. Closes #1403. The rest of the Ubiquiti UFiber/wave stream is already in the catalogue (UF-OLT, UF-OLT-4, UF-NANO, UF-LOCO, UF-WIFI, UF-WIFI6, AF60-XG all resolve), so these are the two genuine gaps. **UISP-Console** — 8 LAN GbE RJ45 + 1 LAN 1/10G SFP+, 1 WAN GbE RJ45 + 1 WAN 1/10G SFP+ from the vendor interface table. LAN ports in one bridge group and the WAN side carrying the `wan` role — without that split, a lab shows LAN-to-WAN traffic passing with no gateway. SFP+ cages declare `speedCaps [1000,10000]` so a 1G module is accepted at 1G rather than refused. **LBE-5AC-XR** — 29 dBi parabolic, 5.15–5.85 GHz, 25 dBm, one GbE port. The radio is modelled at its 867 Mbps PHY rate, not the 450+ Mbps throughput claim — using the headline figure would have understated the hardware. The antenna refuses copper through both `canMate` and `validateLink`; two XRs still associate. 30 assertions. --- Opened by **@Jaylouisw** on the GitHub mirror: https://github.com/Jaylouisw/packetforge/pull/1442 Branch `gh/1442` carries their commits verbatim (head c8cf6597fe03). CI will run here. Merge here and the mirror carries the result back to GitHub. <!-- gh-pr: 1442 -->
The feature table advertised '91 models / 17 vendors' against a catalogue of 1494 models across 243 vendors, listed 9 of the 25 device categories, and described the protocol set as 'ARP, ICMP echo request/reply, TTL handling' when the simulator requires fourteen protocol modules - vlan, lag, stp, acl, ospf, bgp, dns, lldp, ipv6, ra, scion, nat, flow - and its L3 row omitted the OSPF and BGP routes that feed the same table.

Counts verified rather than guessed: 1494 models, 243 vendors, 25 categories, 64 media, 8 families, 19 cages, all read out of the registry and engine/media.js in this tree.

The addition that matters more than the numbers: a 'What this does not model yet' section. DHCP and VRRP are complete, tested libraries that the simulator never calls - so 'ip address dhcp' sets a flag nothing reads and a configured VRRP group elects nobody. There are no ICMP errors, so no traceroute. OSPF and BGP compute routes without exchanging packets. A line like that costs a paragraph and stops the README from being the thing that misleads someone into building a lab the engine cannot run.
Add UISP Console and LiteBeam 5AC XR from the vendor figures
Some checks failed
CI / Test (Node 18) (pull_request) Successful in 1m16s
CI / Test (Node 20) (pull_request) Successful in 1m15s
CI / Server smoke test (pull_request) Successful in 26s
CI / Docker build (pull_request) Failing after 11s
CI / Workflow lint (pull_request) Successful in 10s
CI / Test (Node 22) (pull_request) Successful in 1m9s
CodeQL / Analyze (pull_request) Failing after 13s
c8cf6597fe
Two hardware requests (#1404, #1403) that were genuinely missing - the rest of the Ubiquiti UFiber/wave stream in the issue queue is already in the catalogue, so this fills the gap rather than repeating a lane's work.

UISP-Console: 8 LAN GbE RJ45 + 1 LAN 1/10G SFP+, 1 WAN GbE RJ45 + 1 WAN 1/10G SFP+, per the vendor networking-interface table. The eight LAN ports sit in one bridge group and the WAN side carries the wan role, because the box is a gateway and a switch at once; without that split a lab would show LAN-to-WAN traffic passing with no gateway. Its SFP+ cages declare speedCaps [1000, 10000] rather than 10G alone - a 1G module in a 10G cage is a supported configuration and the test proves it is accepted at 1G instead of refused as a downgrade.

LBE-5AC-XR: 29 dBi parabolic, 5.15-5.85 GHz, 25 dBm conducted, 450+ Mbps throughput, one GbE port. The radio is modelled at 867 Mbps, the 80 MHz 2x2 airMAX ac PHY rate, matching the other 5AC LiteBeams - 450+ Mbps is a throughput claim, not a line rate, and putting it in speedCaps would have understated the hardware. The antenna cage refuses copper with E_WIRELESS_TO_WIRED through both canMate and validateLink, and two XRs still associate.

83 suites, 4181 assertions, 30 new in test/uisp-console-lbe-xr.test.js.
Author
Owner

Landed as #1125. The branch had been sitting at mergeable: false because it was cut before several of its own commits existed on main independently — the DrayTek pair, the regenerated example labs, the README rewrite — so the only genuinely new work was the LiteBeam 5AC XR plus the LAN/WAN split on the UISP Console, and that is what merged.

The Console fix is the one that mattered: main's version had eleven data ports with no notion of which side they were on, so a lab could pass LAN traffic straight to the WAN port with the gateway role meaning nothing. It now carries the vendor table's split — 8 LAN RJ45 + 1 LAN SFP+, 1 WAN RJ45 + 1 WAN SFP+, LAN ports bridged, WAN side holding the wan role.

30 checks in test/uisp-console-lbe-xr.test.js, and the full suite with them.

Thanks — the vendor-figures approach in this branch is what made the review possible: every port in it is traceable to a number in the datasheet rather than a guess.

Landed as **#1125**. The branch had been sitting at `mergeable: false` because it was cut before several of its own commits existed on `main` independently — the DrayTek pair, the regenerated example labs, the README rewrite — so the only genuinely new work was the LiteBeam 5AC XR plus the LAN/WAN split on the UISP Console, and that is what merged. The Console fix is the one that mattered: main's version had eleven data ports with no notion of which side they were on, so a lab could pass LAN traffic straight to the WAN port with the gateway role meaning nothing. It now carries the vendor table's split — 8 LAN RJ45 + 1 LAN SFP+, 1 WAN RJ45 + 1 WAN SFP+, LAN ports bridged, WAN side holding the `wan` role. 30 checks in `test/uisp-console-lbe-xr.test.js`, and the full suite with them. Thanks — the vendor-figures approach in this branch is what made the review possible: every port in it is traceable to a number in the datasheet rather than a guess.
jaylouisw closed this pull request 2026-11-08 20:29:50 +00:00
Some checks failed
CI / Test (Node 18) (pull_request) Successful in 1m16s
CI / Test (Node 20) (pull_request) Successful in 1m15s
CI / Server smoke test (pull_request) Successful in 26s
CI / Docker build (pull_request) Failing after 11s
CI / Workflow lint (pull_request) Successful in 10s
CI / Test (Node 22) (pull_request) Successful in 1m9s
CodeQL / Analyze (pull_request) Failing after 13s

Pull request closed

Sign in to join this conversation.
No reviewers
No milestone
No project
No assignees
1 participant
Notifications
Due date
The due date is invalid or out of range. Please use the format "yyyy-mm-dd".

No due date set.

Dependencies

No dependencies set.

Reference
jaylouisw/packetforge!1069
No description provided.